{"product_id":"hertel-750916-square-end-mill-1-8-in-4-flute-solid-carbide","title":"Hertel 750916 Square End Mill 1\/8 in 4 Flute Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe HERTEL 750916 is a solid carbide square end mill designed for precision milling operations in metal fabrication, tool and die, and general machining applications. With a 1\/8 inch cutting diameter, 1\/2 inch length of cut, and 4 flutes, it delivers clean, accurate cuts in ferrous and non-ferrous materials. The micrograin carbide substrate provides edge retention and rigidity in demanding cut conditions. A 30-degree helix angle promotes efficient chip evacuation and smooth cutting action. The bright uncoated finish makes this end mill well suited for non-ferrous materials, aluminum, and general-purpose use where coatings are not required. Machinists and tool room operators working on CNC mills, manual knee mills, and machining centers are the primary users.\u003c\/p\u003e\n\u003cp\u003eThis end mill fits small-diameter milling work including slot milling, peripheral milling, and profiling passes on ferrous and non-ferrous workpieces. Its regular length geometry is suited for standard reach applications where extended reach tooling is unnecessary. The 1\/8 inch shank diameter matches directly to ER collets, end mill holders, and small-bore tool holders commonly found on CNC machining centers and manual mills. The single-end configuration means the tool is replaced once the cutting end is worn rather than indexed or flipped.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid micrograin carbide construction for edge retention and rigidity\u003c\/li\u003e\n  \u003cli\u003e4-flute geometry balances material removal rate with surface finish quality\u003c\/li\u003e\n  \u003cli\u003e30-degree right-hand helix promotes efficient chip evacuation\u003c\/li\u003e\n  \u003cli\u003eCenter-cutting capable, allowing plunge entry into the workpiece\u003c\/li\u003e\n  \u003cli\u003eBright uncoated finish well suited for non-ferrous and general-purpose machining\u003c\/li\u003e\n  \u003cli\u003eRight-hand cutting direction compatible with standard CNC and manual mill spindle rotation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a standard 1\/8 inch shank square end mill compatible with ER collet systems, end mill holders, and small-bore tool holders used on CNC machining centers and manual milling machines accepting 1\/8 inch shank tooling.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified machinist following the machine tool manufacturer guidelines for tool holding and runout. Ensure the machine spindle is fully stopped and locked before loading or removing tooling. Use a calibrated torque wrench when tightening collet nuts to the holder specification and verify runout with a dial indicator before beginning a cut. Small-diameter carbide end mills are brittle and susceptible to breakage from excessive side load, improper speeds and feeds, or loose tool holding.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 1\/8 inch (0.1250 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide (Micrograin)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 1\/2 inch (0.500 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 1\/8 inch (0.1250 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1-1\/2 inches (1.500 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCenter Cutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVariable Helix\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChipbreaker\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Regular\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.01 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 27112803\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HERTEL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 750916\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HERTEL","offers":[{"title":"Default Title","offer_id":51728534962482,"sku":"750916","price":33.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/5b670b13c7b6a3fcad7b27fce554698d.jpg?v=1788692879","url":"https:\/\/voomisupply.com\/products\/hertel-750916-square-end-mill-1-8-in-4-flute-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}