{"product_id":"hertel-750313-solid-carbide-square-end-mill-2-flute-altin","title":"Hertel 750313 Solid Carbide Square End Mill 2 Flute Altin","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe HERTEL 750313 is a single-end, solid carbide square end mill designed for precision milling in demanding machining environments. It features a 0.5 inch cutting diameter, 1 inch length of cut (LOC), and an overall length (OAL) of 3 inches with a 0.5 inch shank diameter. The two-flute geometry and 30-degree helix angle promote efficient chip evacuation, while the AlTiN (aluminum titanium nitride) coating provides elevated heat resistance and extended tool life during high-speed or dry cutting operations. This end mill is center-cutting capable, allowing direct plunge entry into workpieces.\u003c\/p\u003e\u003cp\u003eThis end mill is suited for use in CNC machining centers and manual mills across metalworking shops, tool rooms, and production environments. The right-hand cut orientation and AlTiN finish make it well matched for hard ferrous materials, stainless steels, and high-temperature alloys where heat generation is a concern. It is commonly applied in profile milling, slotting, and peripheral milling operations requiring tight tolerances.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSolid carbide construction for rigidity and wear resistance in demanding cuts\u003c\/li\u003e\n\u003cli\u003eAlTiN coating for superior heat resistance and extended tool life\u003c\/li\u003e\n\u003cli\u003e30-degree helix angle promotes smooth chip flow and reduced cutting forces\u003c\/li\u003e\n\u003cli\u003eCenter-cutting design allows direct plunge milling without a pre-drilled entry hole\u003c\/li\u003e\n\u003cli\u003eRight-hand cut, single-end configuration for standard CNC and manual mill setups\u003c\/li\u003e\n\u003cli\u003eTwo-flute geometry provides ample chip clearance in slotting and full-width cuts\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a standard 0.5 inch shank, solid carbide square end mill compatible with ER and straight-bore collet systems accepting 0.5 inch shank tooling in CNC machining centers and manual milling machines.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified machinist following standard tooling change procedures. Ensure the spindle is fully stopped and the machine is in a safe, locked-out state before changing tooling. Seat the shank fully in the collet or tool holder to the minimum engagement depth recommended for the holder type, and verify runout with a dial indicator before beginning a cut. Consult machine and toolholder manufacturer guidelines for appropriate clamping torque on collet nuts.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Diameter\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut (LOC)\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (OAL)\u003c\/strong\u003e: 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Type\u003c\/strong\u003e: Square\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCut Type\u003c\/strong\u003e: Single End\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCut Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter Cutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: AlTiN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.6 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HERTEL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 750313\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HERTEL","offers":[{"title":"Default Title","offer_id":51752577892658,"sku":"750313","price":101.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/24e212ec22eac29f07029c279cdb5b1f.jpg?v=1788929192","url":"https:\/\/voomisupply.com\/products\/hertel-750313-solid-carbide-square-end-mill-2-flute-altin","provider":"Voomi Supply","version":"1.0","type":"link"}