{"product_id":"hertel-750000-square-end-mill-1-16-in-3-flute-carbide","title":"Hertel 750000 Square End Mill 1\/16 in 3 Flute Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe HERTEL 750000 is a solid carbide square end mill designed for precision milling in ferrous and non-ferrous materials. With a 1\/16 inch cutting diameter and three flutes, it delivers clean, accurate cuts in tight geometries where larger tooling cannot reach. The 30-degree helix angle promotes efficient chip evacuation and reduces cutting forces. The uncoated micrograin carbide construction provides the rigidity and edge retention needed for small-diameter work in dies, molds, and detailed machining operations. It is a centercutting tool, allowing direct plunge entry without a pre-drilled starting hole. Machinists and tool-and-die professionals working on CNC mills and manual machines will find this end mill well-suited for fine detail passes and slot cutting.\u003c\/p\u003e\n\u003cp\u003eThis end mill is intended for use in small-part machining, mold making, die work, and prototype fabrication where close tolerances and fine feature resolution are required. The 3\/16 inch length of cut and 1\/8 inch shank diameter make it compatible with standard collet systems found on vertical machining centers and CNC routers. The regular length configuration suits most benchtop and full-size CNC setups where a compact tool profile is preferred to minimize deflection at small diameters.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e1\/16 inch cutting diameter for fine-detail and tight-geometry milling\u003c\/li\u003e\n  \u003cli\u003e3-flute design balances chip clearance and surface finish at small diameters\u003c\/li\u003e\n  \u003cli\u003e30-degree helix angle promotes efficient chip evacuation and reduces cutting pressure\u003c\/li\u003e\n  \u003cli\u003eCentercutting geometry allows direct plunge entry without pre-drilling\u003c\/li\u003e\n  \u003cli\u003eMicrograin solid carbide construction for rigidity and edge retention\u003c\/li\u003e\n  \u003cli\u003eRight-hand cut, uncoated, regular length configuration\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with standard 1\/8 inch collet systems on CNC vertical machining centers, manual knee mills, and CNC routers running appropriate small-diameter toolpaths.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eThis end mill should be installed and removed by a qualified machinist following the machine tool manufacturer's spindle and collet procedures. Ensure the machine spindle is fully stopped and all energy is locked out before changing tooling. Use a properly sized collet in good condition to avoid runout, which is especially critical at 1\/16 inch diameter where deflection and tool breakage risk are elevated. Confirm spindle speed and feed rate settings are appropriate for the workpiece material and tool diameter before initiating the cut.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 1\/16 inch (0.0625 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 3\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: Micrograin\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 3\/16 inch (0.1875 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 1\/8 inch (0.1250 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1-1\/2 inches (1.5000 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVariable Helix\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVariable Index\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChipbreaker\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Regular\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HERTEL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 750000\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HERTEL","offers":[{"title":"Default Title","offer_id":51735490396466,"sku":"750000","price":24.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/529524de3ffe916c5cb32d64f9eda563.jpg?v=1788772697","url":"https:\/\/voomisupply.com\/products\/hertel-750000-square-end-mill-1-16-in-3-flute-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}