{"product_id":"hertel-72300403-chucking-reamer-5-8-in-8-flute-cobalt","title":"Hertel 72300403 Chucking Reamer 5\/8 in 8 Flute Cobalt","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe HERTEL 72300403 is a chucking reamer designed for precision hole finishing in metal fabrication and machining applications. Built from cobalt steel with a bright, uncoated finish, it delivers reliable performance in tough materials where high-speed steel may fall short. The reamer measures 0.625 inches in diameter with a 9 inch overall length and a 2.25 inch straight flute length. Eight right-hand flutes provide smooth cutting action and consistent bore geometry. The straight-cylindrical shank seats securely in standard drill chucks and collet holders. This tool is handled by machinists, tool and die makers, and maintenance technicians performing precision reaming operations on the shop floor or in the field.\u003c\/p\u003e\u003cp\u003eThis chucking reamer is suited for finishing drilled holes to tight tolerances in steel, cast iron, aluminum, and similar materials. The cobalt steel construction makes it a practical choice for harder alloys and interrupted cuts where thermal resistance matters. At 0.625 inches diameter, it falls within the common mid-range reamer category used across general machining, production runs, and repair work. The straight flute geometry works well in through-holes and shorter blind holes where chip clearance is manageable.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCobalt steel construction for improved heat and wear resistance over standard HSS\u003c\/li\u003e\n\u003cli\u003e8 straight right-hand flutes for consistent finish and precise bore sizing\u003c\/li\u003e\n\u003cli\u003e0.625 inch (5\/8 inch) cutting diameter\u003c\/li\u003e\n\u003cli\u003e9 inch overall length with 2.25 inch flute length\u003c\/li\u003e\n\u003cli\u003eBright, uncoated finish suitable for use with cutting fluids\u003c\/li\u003e\n\u003cli\u003eStraight-cylindrical shank compatible with standard drill chucks and collet holders\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style replacement or direct-use chucking reamer for standard drill press, lathe, or CNC applications requiring a 5\/8 inch finishing reamer with a straight-cylindrical shank.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation is performed by machinists or toolroom technicians. Secure the straight-cylindrical shank firmly in a drill chuck or collet before use and verify runout with a dial indicator when tolerance is critical. Always apply an appropriate cutting fluid for the workpiece material to extend tool life and improve surface finish. Do not exceed the recommended feed rate for the material being reamed, as forcing the tool can cause chatter, bell-mouthing, or premature wear.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eReamer Diameter\u003c\/strong\u003e: 5\/8 inch (0.6250 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 9 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 2.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: Cobalt Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDowel Pin Reamer\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOver\/Under Size Reamer\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.23 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23241611\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HERTEL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 72300403\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HERTEL","offers":[{"title":"Default Title","offer_id":51730626511154,"sku":"72300403","price":100.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/7c0619fafccfe259d61ac48401aa0d8d.jpg?v=1788720490","url":"https:\/\/voomisupply.com\/products\/hertel-72300403-chucking-reamer-5-8-in-8-flute-cobalt","provider":"Voomi Supply","version":"1.0","type":"link"}