{"product_id":"hertel-72297013-chucking-reamer-letter-a-hss-6-flute","title":"Hertel 72297013 Chucking Reamer Letter a Hss 6 Flute","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe HERTEL 72297013 is a straight-shank chucking reamer designed for precision hole finishing in metal and similar materials. Built from high-speed steel (HSS) with a bright, uncoated finish, this reamer is sized to Letter A (0.2340 inch decimal diameter) and delivers clean, accurate finished bores through a 6-flute, right-hand spiral cutting geometry. At 3-7\/8 inches overall length with a 1-1\/2 inch flute length, it fits standard drill press and lathe chuck setups. Machinists and tool-and-die professionals use this style of reamer as the final sizing pass to achieve tight bore tolerances that drilling alone cannot produce.\u003c\/p\u003e\u003cp\u003eThis chucking reamer is suited for production and maintenance machining environments where Letter A diameter holes are required. The straight-cylindrical shank mounts directly into drill chucks, collets, or floating holders on drill presses, lathes, and CNC machining centers. The right-hand cutting direction and spiral flute configuration promote smooth chip evacuation and consistent surface finish across a range of ferrous and non-ferrous workpiece materials. It is not configured as a dowel pin reamer or as an over\/under size reamer.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eLetter A diameter: 0.2340 inch decimal equivalent for precise final bore sizing\u003c\/li\u003e\n\u003cli\u003e6-flute right-hand spiral geometry for smooth chip flow and consistent finish\u003c\/li\u003e\n\u003cli\u003eHSS construction provides good wear resistance across a range of common metals\u003c\/li\u003e\n\u003cli\u003eBright\/uncoated finish suitable for use with standard cutting fluids\u003c\/li\u003e\n\u003cli\u003eStraight-cylindrical shank compatible with standard drill chucks and collet systems\u003c\/li\u003e\n\u003cli\u003eNot a dowel pin or over\/under size variant — standard production sizing reamer\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style chucking reamer for use in drill presses, lathes, and machining centers that accept straight-cylindrical shank tooling in the Letter A diameter range.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eChucking reamers are installed by machinists using standard drill chucks or collet holders; ensure the shank is fully seated and the chuck is properly tightened before operation. Always power down and lock out the machine spindle before changing tooling. Apply an appropriate cutting fluid for the workpiece material to extend tool life and improve surface finish. Do not use a chucking reamer as a primary drilling tool — it is a finishing tool intended for pre-drilled or bored holes that are already close to final size.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eReamer Diameter (Letter)\u003c\/strong\u003e: A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReamer Diameter (Decimal Inch)\u003c\/strong\u003e: 0.2340 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReamer Diameter Range\u003c\/strong\u003e: 0.2000 to 0.2499 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 3-7\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 1-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpiral Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: HSS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDowel Pin Reamer\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOver\/Under Size Reamer\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.15 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23241611\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HERTEL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 72297013\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HERTEL","offers":[{"title":"Default Title","offer_id":51730068111666,"sku":"72297013","price":55.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/c26009126499e218bbcd7aa61ac64bab_553e652d-297a-4985-9a5b-f11465cec5eb.jpg?v=1788711152","url":"https:\/\/voomisupply.com\/products\/hertel-72297013-chucking-reamer-letter-a-hss-6-flute","provider":"Voomi Supply","version":"1.0","type":"link"}