{"product_id":"hertel-72022056-chucking-reamer-0-2205-in-hss-6-flute","title":"Hertel 72022056 Chucking Reamer 0.2205 in Hss 6 Flute","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe HERTEL 72022056 is a high-speed steel (HSS) chucking reamer designed to finish-ream drilled or bored holes to a precise 0.2205-inch diameter. With a straight-cylindrical shank, this reamer mounts directly in a drill chuck or collet on a drill press, lathe, or CNC machine. The 6-flute, right-hand cutting geometry distributes cutting load evenly across the flute length of 1.25 inches, producing a smooth, accurate bore surface. Overall length is 5 inches. The bright, uncoated finish is well suited to general-purpose reaming in steel, cast iron, aluminum, and similar materials. Machinists and tool-and-die technicians are the primary installers of this tooling.\u003c\/p\u003e\u003cp\u003eThis chucking reamer is used in machine shop, maintenance, and production environments where drilled holes require tight-tolerance finishing. Its 0.2205-inch diameter falls within the 0.2000 to 0.2499 inch diameter range, making it a common selection for letter and number drill series hole finishing. Typical applications include bearing seat preparation, dowel pin hole finishing, and close-tolerance hole sizing on ferrous and non-ferrous workpieces. It is intended for use in a powered spindle rather than by hand.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e0.2205-inch finished bore diameter for precise hole sizing\u003c\/li\u003e\n\u003cli\u003e6-flute, right-hand straight-flute geometry for smooth, even cutting action\u003c\/li\u003e\n\u003cli\u003eHSS construction provides good toughness and wear resistance in general-purpose machining\u003c\/li\u003e\n\u003cli\u003eStraight-cylindrical shank for direct chuck or collet mounting\u003c\/li\u003e\n\u003cli\u003eBright, uncoated finish — no coating to add dimensional variance at the cutting edge\u003c\/li\u003e\n\u003cli\u003e1.25-inch flute length suitable for shallow to moderate hole depths\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style chucking reamer for use in any drill press, lathe tailstock, or CNC spindle equipped with a chuck or collet accepting a straight-cylindrical shank in the corresponding diameter range.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eA licensed machinist or qualified tooling technician should install and operate this reamer. Power down and de-energize the spindle machine fully before changing tooling. Secure the straight shank firmly in a properly sized chuck or collet to prevent runout, which will degrade hole finish and reamer life. Use appropriate cutting fluid for the workpiece material and ensure the reamer is run at the correct speed and feed per standard machining practice for HSS tooling.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eReamer Diameter\u003c\/strong\u003e: 0.2205 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 1.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: HSS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDowel Pin Reamer\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOver\/Under Size Reamer\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.15 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23241611\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HERTEL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 72022056\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HERTEL","offers":[{"title":"Default Title","offer_id":51737540755762,"sku":"72022056","price":55.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/0e222dc0262bb90a42d7d2294d51da27_ac074c97-8bbc-4d95-a7c1-51a83a08f996.jpg?v=1788790054","url":"https:\/\/voomisupply.com\/products\/hertel-72022056-chucking-reamer-0-2205-in-hss-6-flute","provider":"Voomi Supply","version":"1.0","type":"link"}