{"product_id":"hertel-72018153-chucking-reamer-0-1815-in-hss-6-flute","title":"Hertel 72018153 Chucking Reamer 0.1815 in Hss 6 Flute","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe HERTEL 72018153 is a high-speed steel (HSS) chucking reamer designed to finish-ream drilled or bored holes to a precise 0.1815-inch diameter. It features a straight-cylindrical shank for secure chuck holding, six straight flutes for smooth stock removal, and a right-hand cutting direction. The 4.5-inch overall length and 1.125-inch flute length make it well-suited for moderate-depth through-holes and blind-hole finishing in a machine spindle. Machinists, tool-and-die workers, and maintenance technicians use this reamer where close-tolerance hole sizing is required.\u003c\/p\u003e\u003cp\u003eThis chucking reamer is intended for machine use in a lathe, drill press, or machining center. It is appropriate for ferrous and non-ferrous materials where a bright, uncoated HSS tool provides adequate tool life. The 0.1815-inch diameter falls within the 0.1500 to 0.1999-inch decimal-inch range, making it a practical selection for small-diameter precision hole finishing in both job-shop and production environments. No special adapter is required when the shank fits the chuck directly.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003ePrecision 0.1815-inch reaming diameter for close-tolerance hole sizing\u003c\/li\u003e\n\u003cli\u003eHigh-speed steel (HSS) construction provides good wear resistance across common work materials\u003c\/li\u003e\n\u003cli\u003eSix straight flutes promote smooth cutting action and chip clearance\u003c\/li\u003e\n\u003cli\u003eStraight-cylindrical shank seats securely in standard drill chucks and collets\u003c\/li\u003e\n\u003cli\u003eRight-hand cutting direction compatible with standard machine spindle rotation\u003c\/li\u003e\n\u003cli\u003eBright, uncoated finish suitable for general-purpose reaming applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a standard chucking reamer for use in any machine spindle equipped with a chuck or collet capable of holding a straight-cylindrical shank at this diameter range.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eThis reamer is intended for machine operation only — do not use as a hand reamer. Power down and lock out the machine spindle before mounting or removing the tool. Ensure the shank is fully seated and the chuck is properly tightened before beginning a cut. Always apply appropriate cutting fluid for the work material to extend tool life and improve hole finish.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eReamer Diameter\u003c\/strong\u003e: 0.1815 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (OAL)\u003c\/strong\u003e: 4.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 1.125 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: High-Speed Steel (HSS)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDowel Pin Reamer\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOver\/Under Size Reamer\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.15 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23241611\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HERTEL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 72018153\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HERTEL","offers":[{"title":"Default Title","offer_id":51733673115954,"sku":"72018153","price":52.83,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/560aeb02ec3ebf33aa2712c4aa7d1f31_2db7b957-2812-499a-b49e-9a5b9f081281.jpg?v=1788757892","url":"https:\/\/voomisupply.com\/products\/hertel-72018153-chucking-reamer-0-1815-in-hss-6-flute","provider":"Voomi Supply","version":"1.0","type":"link"}