{"product_id":"hertel-71206254-jobber-drill-bit-no-8-hss-oxide","title":"Hertel 71206254 Jobber Drill Bit No. 8 Hss Oxide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe HERTEL 71206254 is a jobber-length drill bit sized to No. 8 wire gauge (0.1990 inch decimal equivalent) and manufactured from high speed steel with an oxide coating for basic lubricity and surface protection. The bit features a 118-degree standard point angle and a two-flute regular spiral configuration, making it a general-purpose choice for drilling through mild steel, aluminum, wood, and similar materials in production or maintenance settings. Overall length is 3-5\/8 inches with a flute length of 2-7\/16 inches. The straight-cylindrical shank accepts standard three-jaw drill chucks. Installation is performed by machinists, maintenance technicians, and general trade professionals.\u003c\/p\u003e\n\u003cp\u003eThis bit is suited for general-purpose drilling operations in light manufacturing, maintenance and repair, and fabrication environments. The No. 8 wire size (0.1990 inch) fits applications where a close-tolerance hole in the 0.1500 to 0.2000 inch range is required. The right-hand cut and regular spiral flute promote efficient chip evacuation in most common workpiece materials. The web-thinned, tapered web design reduces thrust requirements at the point, which is particularly useful in hand-drill or low-torque machine applications.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eNo. 8 wire gauge size — 0.1990 inch decimal diameter, straight-cylindrical shank of matching diameter\u003c\/li\u003e\n  \u003cli\u003eHigh speed steel construction for general-purpose drilling in metal, wood, and plastics\u003c\/li\u003e\n  \u003cli\u003eOxide coating provides baseline corrosion resistance and surface lubricity\u003c\/li\u003e\n  \u003cli\u003e118-degree standard point angle with web-thinned, tapered web for reduced entry thrust\u003c\/li\u003e\n  \u003cli\u003eTwo-flute regular spiral, right-hand cut — compatible with standard drill chucks and drill presses\u003c\/li\u003e\n  \u003cli\u003eCoolant-through feature not present — intended for conventional dry or externally lubricated drilling\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a general-purpose jobber-length drill bit for use in standard three-jaw drill chucks, drill presses, and hand drills accepting straight-cylindrical shanks in the 0.1990 inch diameter range.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eSecure the straight-cylindrical shank firmly in a properly sized drill chuck before operation. Ensure the workpiece is clamped or fixtured to prevent movement during drilling. Apply an appropriate cutting fluid or lubricant when drilling ferrous metals to extend bit life. Inspect the cutting edges and point for wear or chipping before each use and replace the bit if geometry is compromised.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Size (Wire)\u003c\/strong\u003e: No. 8\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Size (Decimal Inch)\u003c\/strong\u003e: 0.1990 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 3-5\/8 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 2-7\/16 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.1990 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 118 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Standard\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: High Speed Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Oxide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral (Regular)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeb Configuration\u003c\/strong\u003e: Tapered, Web-Thinned\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Grade\u003c\/strong\u003e: General Purpose\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplicable Size Range\u003c\/strong\u003e: 0.1500 to 0.2000 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.3 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23241634\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HERTEL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 71206254\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HERTEL","offers":[{"title":"Default Title","offer_id":51747557146930,"sku":"71206254","price":39.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/c94a14481e829169eab11ccf6d028a10.jpg?v=1788882515","url":"https:\/\/voomisupply.com\/products\/hertel-71206254-jobber-drill-bit-no-8-hss-oxide","provider":"Voomi Supply","version":"1.0","type":"link"}