{"product_id":"hertel-66693698-jobber-length-drill-bit-set-115-pc-hss","title":"Hertel 66693698 Jobber Length Drill Bit Set 115 Pc Hss","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe HERTEL 66693698 is a 115-piece jobber length drill bit set engineered for metalworking and general-purpose drilling applications. Built from high-speed steel (HSS) with an oxide finish, each bit features a 135-degree split point that reduces walking on contact and allows drilling to start without a center punch in most setups. The set covers wire gauge sizes #60 through #1, letter sizes A through Z, and fractional sizes from 1\/16 inch up to 1\/2 inch in 1\/64-inch step increments. The full range in a single case makes this set a practical bench staple for shops and service trucks handling daily mixed-material drilling work.\u003c\/p\u003e\u003cp\u003eThis set is rated for heavy-duty metalworking and is suited for use in machine shops, maintenance facilities, and fabrication environments. The 135-degree split point geometry is particularly effective on harder metals where bit walking and heat buildup are common concerns. It covers a broad size range that supports drilling pilot holes, clearance holes, and production runs across a wide variety of fastener and hardware specifications. The included metal or plastic storage case keeps bits organized and protects cutting edges between uses.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e115 pieces covering wire gauge #60 to #1, letter A to Z, and fractional 1\/16 inch to 1\/2 inch\u003c\/li\u003e\n\u003cli\u003e135-degree split point reduces bit walking and eliminates the need for center punching on most surfaces\u003c\/li\u003e\n\u003cli\u003eHigh-speed steel construction for durability in metalworking and multipurpose drilling\u003c\/li\u003e\n\u003cli\u003eOxide coating finish for basic corrosion resistance and surface hardness\u003c\/li\u003e\n\u003cli\u003e1\/64-inch fractional step increments for close-tolerance hole sizing\u003c\/li\u003e\n\u003cli\u003eIncludes metal or plastic storage case for organized storage and transport\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a general-purpose jobber length drill bit set for use in standard three-jaw drill chucks and compatible with common benchtop drill presses, hand drills, and mill setups used in metalworking and multipurpose applications.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation and bit changes should be performed with the drill or machine powered down and unplugged or locked out per applicable safety procedures. Secure bits fully in the chuck and verify seating before operation. Cutting speed and feed rate should be matched to bit diameter and workpiece material to avoid premature wear or breakage. A licensed machinist or qualified maintenance technician should perform setup in production environments where applicable.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Pieces\u003c\/strong\u003e: 115\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: High-Speed Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Oxide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Split Point\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 135 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Drill Bit Size (Fractional)\u003c\/strong\u003e: 1\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Drill Bit Size (Fractional)\u003c\/strong\u003e: 1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Drill Bit Size (Wire)\u003c\/strong\u003e: #60\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Drill Bit Size (Wire)\u003c\/strong\u003e: #1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Drill Bit Size (Letter)\u003c\/strong\u003e: A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Drill Bit Size (Letter)\u003c\/strong\u003e: Z\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStep Increments\u003c\/strong\u003e: 1\/64 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem of Measurement\u003c\/strong\u003e: Inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool Application\u003c\/strong\u003e: Metalworking, Multipurpose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool Performance\u003c\/strong\u003e: Heavy Duty\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStorage Unit Type\u003c\/strong\u003e: Case\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStorage Unit Material\u003c\/strong\u003e: Metal or Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 8 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HERTEL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 66693698\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HERTEL","offers":[{"title":"Default Title","offer_id":51740639363378,"sku":"66693698","price":686.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/b34c421c47472ab8ef3c68c146acdb54.jpg?v=1788826400","url":"https:\/\/voomisupply.com\/products\/hertel-66693698-jobber-length-drill-bit-set-115-pc-hss","provider":"Voomi Supply","version":"1.0","type":"link"}