{"product_id":"hertel-62889274-roughing-end-mill-1-inch-5-flute-cobalt","title":"Hertel 62889274 Roughing End Mill 1 Inch 5 Flute Cobalt","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe HERTEL 62889274 is a single-end roughing end mill designed for aggressive material removal in milling operations. Built from M42 cobalt high-speed steel and finished with a Titanium Nitride (TiN) coating, it handles tough ferrous and non-ferrous materials where standard HSS tooling wears prematurely. The cutter measures 1 inch in diameter with a 3\/4-inch shank, a 1.5-inch length of cut, and a 3.75-inch overall length. Its 5-flute fine-pitch geometry produces a semi-finished surface while removing stock rapidly, making it a practical choice for roughing passes before a finish end mill is run. Right-hand cutting and right-hand spiral flute direction are standard. Installed by machinists and tool-and-die professionals on manual mills and CNC machining centers.\u003c\/p\u003e\n\u003cp\u003eThis roughing end mill suits horizontal and vertical milling setups in job shops, maintenance machining environments, and production floors. The 1-inch diameter and 3\/4-inch shank fit standard ER collets, side-lock holders, and Weldon-style tool holders commonly found on knee mills and VMCs. The TiN coating extends tool life at elevated cutting speeds compared to uncoated cobalt, making it well suited for steel, alloy steel, cast iron, and similar materials where heat generation is a concern during roughing passes. The non-centercutting design means plunge milling is not recommended; use a drilled or bored entry point or ramp into the cut.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eM42 cobalt steel construction for improved heat and wear resistance over standard M2 HSS\u003c\/li\u003e\n  \u003cli\u003eTitanium Nitride (TiN) coating extends tool life at higher cutting speeds\u003c\/li\u003e\n  \u003cli\u003e5-flute fine-pitch design balances chip evacuation with surface finish quality during roughing\u003c\/li\u003e\n  \u003cli\u003eRight-hand cut, right-hand spiral flute direction for conventional milling machine spindles\u003c\/li\u003e\n  \u003cli\u003eSingle-end configuration with a 3\/4-inch shank for broad holder compatibility\u003c\/li\u003e\n  \u003cli\u003eNon-centercutting geometry — requires a pre-drilled entry or ramping approach\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style roughing end mill for use in standard 3\/4-inch bore milling tool holders on horizontal and vertical machining centers and knee mills.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by a qualified machinist or tooling technician. Ensure the machine spindle is fully stopped and locked out before inserting or removing the tool from its holder. Confirm the holder bore matches the 3\/4-inch shank diameter and that the tool is seated to the correct gage length before tightening. Because this is a non-centercutting end mill, do not attempt straight plunge cuts; always ramp or use a pre-machined entry point to prevent tool damage.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.75 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 1.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 3.75 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 5\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Cobalt (M42)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Titanium Nitride (TiN)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePitch\u003c\/strong\u003e: Fine\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Type\u003c\/strong\u003e: Single\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVariable Helix\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.5 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HERTEL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 62889274\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HERTEL","offers":[{"title":"Default Title","offer_id":51732355121458,"sku":"62889274","price":109.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/db0810c1142f2367d4cd584789a62993.jpg?v=1788741994","url":"https:\/\/voomisupply.com\/products\/hertel-62889274-roughing-end-mill-1-inch-5-flute-cobalt","provider":"Voomi Supply","version":"1.0","type":"link"}