{"product_id":"hertel-61698445-screw-machine-drill-bit-39-64-in-hss","title":"Hertel 61698445 Screw Machine Drill Bit 39\/64 in Hss","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe HERTEL 61698445 is a screw machine length drill bit designed for high-volume drilling in metal, wood, and plastic. Built from high-speed steel with an oxide coating, it delivers reliable performance in general-purpose production and maintenance applications. The 39\/64-inch diameter (0.6094 inches decimal) and 118-degree standard point angle make it well suited for starting on flat or curved surfaces without center punching. The shorter-than-jobber overall length of 4.25 inches provides added rigidity, reducing deflection in drill press and CNC machine applications. Two spiral flutes with a 3xD flute-to-diameter ratio evacuate chips efficiently during continuous cuts.\u003c\/p\u003e\n\u003cp\u003eThis bit fits drill press, lathe, and CNC machining center applications where screw machine length rigidity is preferred over standard jobber length. The right-hand cut and straight cylindrical shank allow direct chucking in conventional three-jaw drill chucks and collet-style tool holders. It is suited for job shops, maintenance technicians, and production machinists working in general-purpose metal fabrication environments. The 2.75-inch flute length accommodates typical through-hole depths in the 39\/64-inch diameter range without requiring peck drilling cycles on most workpiece thicknesses.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-speed steel construction provides heat resistance in continuous-duty metal drilling\u003c\/li\u003e\n  \u003cli\u003eOxide coating reduces friction and provides moderate corrosion resistance during storage and use\u003c\/li\u003e\n  \u003cli\u003e118-degree standard point angle suits flat-surface starting on most common metals\u003c\/li\u003e\n  \u003cli\u003eScrew machine length (4.25 inches OAL) increases rigidity and reduces bit deflection versus jobber length\u003c\/li\u003e\n  \u003cli\u003eTwo-flute spiral design promotes chip evacuation in through-hole drilling\u003c\/li\u003e\n  \u003cli\u003eStraight cylindrical shank fits standard drill chucks and collet holders without adapters\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a general-purpose replacement or production-supply screw machine drill bit for use in drill presses, CNC machining centers, and lathes accepting a straight cylindrical shank in the 39\/64-inch diameter range. Conforms to ANSI specification designation.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation and use should be performed by a qualified machinist or maintenance technician familiar with rotating cutting tools. Always ensure the drill chuck or collet is fully tightened and the workpiece is securely clamped before initiating a cut. Inspect the cutting edges for wear or chipping before each use and replace the bit if edge integrity is compromised. Apply appropriate cutting fluid for the workpiece material to extend tool life and improve hole finish.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 39\/64 inches (0.6094 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 4.25 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 2.75 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 118 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpiral Type\u003c\/strong\u003e: Regular\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute-to-Diameter Ratio\u003c\/strong\u003e: 3xD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: High-Speed Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Oxide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Standard\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGrade\u003c\/strong\u003e: General Purpose\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpecification\u003c\/strong\u003e: ANSI\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.17 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HERTEL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 61698445\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HERTEL","offers":[{"title":"Default Title","offer_id":51733794554162,"sku":"61698445","price":68.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/b012114df80d8e1e81faedc2408c7b76.jpg?v=1788759308","url":"https:\/\/voomisupply.com\/products\/hertel-61698445-screw-machine-drill-bit-39-64-in-hss","provider":"Voomi Supply","version":"1.0","type":"link"}