{"product_id":"hertel-42270-cobalt-jobber-drill-3-50mm-135-deg-split-point","title":"Hertel 42270 Cobalt Jobber Drill 3.50mm 135 Deg Split Point","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe HERTEL 42270 is an M35 cobalt steel jobber-length drill bit designed for drilling stainless steel, hardened materials, and other tough alloys where standard high-speed steel bits fail prematurely. It measures 3.50 mm (0.1378 inches) in diameter with an overall length of 70.00 mm (2.7559 inches) and a flute length of 39.00 mm (1.5354 inches). The 135-degree split point reduces walking on entry and lowers thrust requirements, making it well suited for production drilling in difficult materials. The oxide finish provides baseline lubricity and corrosion resistance. This bit is installed and used by machinists, maintenance technicians, pipefitters, and field service trades working with stainless and hardened stock.\u003c\/p\u003e\u003cp\u003eThis drill bit is used in hand-held drill drivers, drill presses, and CNC drilling operations where a straight-shank, jobber-length bit is appropriate. The 5xD flute-to-diameter ratio provides adequate chip evacuation for most through-hole and blind-hole applications in stainless steel and hardened materials. The right-hand cutting direction is standard for conventional drilling operations. It is suited for light production runs or precision maintenance work where bit longevity in difficult materials is a priority.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eM35 cobalt steel construction handles stainless steel and hardened workpiece materials\u003c\/li\u003e\n\u003cli\u003e135-degree split point reduces drill walk and lowers entry thrust\u003c\/li\u003e\n\u003cli\u003eRegular spiral flute with 5xD ratio supports efficient chip clearing\u003c\/li\u003e\n\u003cli\u003eOxide finish provides surface lubricity and mild corrosion protection\u003c\/li\u003e\n\u003cli\u003eStraight cylindrical shank fits standard drill chucks without adapters\u003c\/li\u003e\n\u003cli\u003eRight-hand cutting direction for use in conventional forward-rotation drilling\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a jobber-length straight-shank drill bit compatible with any drill press, hand drill, or CNC spindle accepting a straight cylindrical shank. Primary workpiece materials are stainless steel and hardened materials per manufacturer specification.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eThis bit is installed by machinists and trade technicians in any chuck rated for straight-shank tooling. Secure the shank fully in the chuck jaws before operation and verify runout on drill press setups. Use cutting fluid or coolant-compatible lubricant when drilling stainless steel to extend bit life and prevent work hardening at the cut zone. Inspect the split point for chipping between uses, as cobalt bits can fracture under side-loading or excessive feed pressure.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 3.50 mm (0.1378 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 70.00 mm (2.7559 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 39.00 mm (1.5354 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 135 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Split Point\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Regular Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpiral Type\u003c\/strong\u003e: Regular\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute-to-Diameter Ratio\u003c\/strong\u003e: 5xD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight Cylindrical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: M35 Cobalt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Oxide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Stainless Steel, Hardened Materials\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Bit Grade\u003c\/strong\u003e: Heavy Duty\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.1 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HERTEL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 42270\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HERTEL","offers":[{"title":"Default Title","offer_id":51752206205234,"sku":"42270","price":40.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/b7c98c8ebd6048bdc267fa2c8958f170.jpg?v=1788926598","url":"https:\/\/voomisupply.com\/products\/hertel-42270-cobalt-jobber-drill-3-50mm-135-deg-split-point","provider":"Voomi Supply","version":"1.0","type":"link"}