{"product_id":"hertel-42169-cobalt-jobber-drill-bit-1-2-in-135-deg","title":"Hertel 42169 Cobalt Jobber Drill Bit 1\/2 in 135 Deg","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe HERTEL 42169 is a cobalt jobber-length drill bit designed for high-performance drilling in hard and abrasive materials. Built from M35 cobalt steel with a bright uncoated finish, it delivers heat resistance and edge retention that standard high-speed steel bits cannot match. The 135-degree split point reduces walking and allows drilling to begin without a center punch on most materials. At 6 inches overall length with a 4.5-inch flute length, this bit handles standard jobber-depth applications in metal fabrication, maintenance, and industrial service work. It is well suited for licensed tradespeople and experienced machinists working with harder steels, stainless, and cast materials.\u003c\/p\u003e\n\u003cp\u003eThis drill bit is used in metal drilling applications across commercial and industrial settings, including HVAC, plumbing, and electrical rough-in work where drilling through structural steel, angle iron, or hard sheet metal is required. The 1\/2-inch diameter and straight cylindrical shank allow it to seat in standard three-jaw keyed or keyless drill chucks without adapters. The right-hand spiral flute geometry provides efficient chip evacuation during through-hole and blind-hole drilling operations.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eM35 cobalt steel construction for improved heat and wear resistance over standard HSS bits\u003c\/li\u003e\n  \u003cli\u003e135-degree split point reduces thrust force and eliminates walk on hard materials\u003c\/li\u003e\n  \u003cli\u003eBright uncoated finish provides a close-tolerance cutting edge with no coating buildup\u003c\/li\u003e\n  \u003cli\u003e4.5-inch flute length supports efficient chip clearance in deeper cuts\u003c\/li\u003e\n  \u003cli\u003eRight-hand cut with regular spiral and straight cylindrical shank for universal chuck compatibility\u003c\/li\u003e\n  \u003cli\u003eNo coolant-through requirement simplifies use with standard drill equipment\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a standard jobber-length drill bit compatible with any 1\/2-inch or larger keyed or keyless drill chuck accepting a straight cylindrical shank, including portable drills, drill presses, and milling machines used in trade and industrial applications.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eThis bit should be installed and operated by qualified tradespeople familiar with metal drilling practices. Secure the workpiece and ensure the chuck is fully tightened before operation. Use appropriate cutting fluid or lubricant when drilling stainless steel or hardened alloys to prolong edge life and reduce heat buildup. Inspect the cutting edges for wear before each use and replace when the split point shows signs of dulling or chipping.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 1\/2 inch (0.5000 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 6 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 4.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 135 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Split\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Cobalt (M35 grade)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral (Regular)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.14 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23241634\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HERTEL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 42169\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HERTEL","offers":[{"title":"Default Title","offer_id":51755231510834,"sku":"42169","price":23.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/47e3fd4dcccf52a89b27c8a904a57d6d.jpg?v=1788952427","url":"https:\/\/voomisupply.com\/products\/hertel-42169-cobalt-jobber-drill-bit-1-2-in-135-deg","provider":"Voomi Supply","version":"1.0","type":"link"}