{"product_id":"hertel-41115072-roughing-end-mill-1-in-5-flute-cobalt","title":"Hertel 41115072 Roughing End Mill 1 in 5 Flute Cobalt","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe HERTEL 41115072 is a single-end roughing end mill engineered for aggressive material removal in milling applications. Built from M42 cobalt high-speed steel and finished with a Titanium Nitride (TiN) coating, it delivers extended tool life and improved heat resistance compared to standard HSS tooling. The 1-inch diameter cutting head features 5 flutes in a right-hand helical configuration, providing efficient chip evacuation during heavy roughing passes. At 4 inches length of cut and 6.5 inches overall length, it suits deep-pocket and high-stock-removal operations. Licensed machinists and tooling technicians are the primary users of this end mill in production and job-shop environments.\u003c\/p\u003e\u003cp\u003eThis roughing end mill is suited for metalworking applications where rapid stock removal is the priority over surface finish. The 5-flute design increases feed rates relative to fewer-flute options while the TiN coating reduces built-up edge on ferrous and non-ferrous workpieces. It is a regular-length, non-center-cutting tool intended for peripheral milling, slotting entry from the side, and profiling cuts on CNC machining centers and manual knee mills where the shank diameter of 1 inch matches the tool holder bore.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eM42 cobalt HSS construction for improved hardness and heat resistance over standard M2 HSS\u003c\/li\u003e\n\u003cli\u003eTitanium Nitride (TiN) coating extends tool life and reduces friction during cutting\u003c\/li\u003e\n\u003cli\u003e5-flute geometry increases feed rate potential and improves surface finish on roughing passes\u003c\/li\u003e\n\u003cli\u003eRight-hand cut and right-hand flute direction compatible with standard CNC and manual spindles\u003c\/li\u003e\n\u003cli\u003e1-inch shank diameter matches common tool holder and collet chuck bores\u003c\/li\u003e\n\u003cli\u003eNon-center-cutting design requires side entry or pre-drilled starting hole\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a direct-fit roughing end mill for standard 1-inch bore tool holders, collet chucks, and end mill holders used in CNC machining centers and manual milling machines.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation of this end mill is performed by qualified machinists or tooling technicians. Power down and lock out the spindle before seating or removing the tool from the holder. Ensure the shank is fully engaged in the tool holder to the manufacturer-recommended engagement depth and torque the retention screws or collet nut according to the tool holder specifications. Because this is a non-center-cutting end mill, do not plunge axially into solid material — use a ramp entry, helical entry, or pre-drilled hole.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Cobalt (M42 HSS)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: M42\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating \/ Finish\u003c\/strong\u003e: Titanium Nitride (TiN)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 6.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Type\u003c\/strong\u003e: Single End\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Regular\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1.15 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HERTEL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 41115072\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HERTEL","offers":[{"title":"Default Title","offer_id":51731574980914,"sku":"41115072","price":166.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/132fe3feda4089021fa44b3c4cb96194.jpg?v=1788732682","url":"https:\/\/voomisupply.com\/products\/hertel-41115072-roughing-end-mill-1-in-5-flute-cobalt","provider":"Voomi Supply","version":"1.0","type":"link"}