{"product_id":"hertel-4006114-indexable-insert-drill-2-3-8-in-2xd","title":"Hertel 4006114 Indexable Insert Drill 2-3\/8 in 2xd","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe HERTEL 4006114 is a straight-shank indexable insert drill engineered for high-material-removal drilling in metal cutting applications. With a 2.375-inch drill diameter and a maximum drill depth of 4.75 inches at a 2xD depth-to-diameter ratio, this tool is built for rigid, high-feed drilling on machining centers and lathes. The 1.5-inch straight-cylindrical shank provides solid tool holding in standard chucks and hydraulic holders. It accepts two indexable inserts in the HID drill style, allowing for fast insert changes without removing the body from the spindle. Coolant-through capability is supported via a 1\/4-inch shank-end coolant hole thread, helping to flush chips and control heat at the cutting zone.\u003c\/p\u003e\u003cp\u003eThis indexable insert drill is suited for production machining environments where repeatable hole quality and tool economy are priorities. Typical applications include roughing and semi-finishing holes in steel, cast iron, and similar materials on CNC machining centers or turning centers. The right-hand cutting direction and straight shank configuration make it a straightforward fit for horizontal and vertical machining setups. The tool body is constructed from steel and is designed to be used with HPMT186812-GP inserts as specified by the manufacturer.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e2.375-inch drill diameter with 4.75-inch maximum drill depth at 2xD ratio\u003c\/li\u003e\n\u003cli\u003eStraight-cylindrical 1.5-inch shank for compatibility with standard toolholders\u003c\/li\u003e\n\u003cli\u003eAccepts two indexable HID-style inserts for cost-effective cutting edge management\u003c\/li\u003e\n\u003cli\u003eCoolant-through design with 1\/4-inch threaded shank-end coolant port for chip evacuation and thermal control\u003c\/li\u003e\n\u003cli\u003eRight-hand cutting direction; steel tool body construction\u003c\/li\u003e\n\u003cli\u003eFlute length of 5.067 inches and overall body length of 9.327 inches for reach in deeper setups\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use with HPMT186812-GP indexable inserts. Compatible drill style is HID. Verify toolholder bore and retention method match the 1.5-inch straight-cylindrical shank prior to installation.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified machinist or tooling technician. Ensure the machine spindle is fully stopped and locked out before mounting or removing the drill body. Confirm shank runout and toolholder clamping force meet the machine manufacturer's specifications before cutting. Follow the insert manufacturer's recommended torque procedure when seating indexable inserts, and inspect insert pockets for chips or debris before each insert change.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Diameter\u003c\/strong\u003e: 2.375 inches (60.33 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Drill Diameter\u003c\/strong\u003e: 2.446 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Drill Depth\u003c\/strong\u003e: 4.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Depth by Diameter Ratio\u003c\/strong\u003e: 2xD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 1.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Length\u003c\/strong\u003e: 3.0 inches (76.20 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 5.067 inches (128.70 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Length\u003c\/strong\u003e: 9.327 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCollar Diameter\u003c\/strong\u003e: 2.295 inches (58.29 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Inserts\u003c\/strong\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Compatibility\u003c\/strong\u003e: HPMT186812-GP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Drill Style\u003c\/strong\u003e: HID\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank-End Coolant Hole Thread Size\u003c\/strong\u003e: 1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 8.5 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HERTEL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 4006114\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HERTEL","offers":[{"title":"Default Title","offer_id":51743863832882,"sku":"4006114","price":1196.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/fe8f083d8be9d6ea5bd314eb3c039ed7.jpg?v=1788850523","url":"https:\/\/voomisupply.com\/products\/hertel-4006114-indexable-insert-drill-2-3-8-in-2xd","provider":"Voomi Supply","version":"1.0","type":"link"}