{"product_id":"hertel-2350106-chucking-reamer-5-32-in-hss-4-flute","title":"Hertel 2350106 Chucking Reamer 5\/32 in Hss 4 Flute","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe HERTEL 2350106 is a chucking reamer designed for precision hole finishing in metal and other machinable materials. Built from high-speed steel (HSS) with a bright, uncoated finish, this reamer features 4 right-hand spiral flutes that produce smooth, accurate bores to a nominal diameter of 5\/32 inch (0.1562 inch decimal). The straight-cylindrical shank seats securely in standard chuck holders on mills, drill presses, and lathes. With an overall length of 4 inches and a 1-inch flute length, it is suited for shallow-to-moderate depth reaming operations in production and maintenance machining environments. Machinists and tool-and-die professionals are the primary users.\u003c\/p\u003e\u003cp\u003eThis chucking reamer is applied in general metalworking, toolroom, and maintenance-repair-operations (MRO) settings where a finished bore in the 0.1500 to 0.1999 inch diameter range is required. It is commonly used to bring drilled holes to close-tolerance final size in ferrous and non-ferrous workpieces. The right-hand cutting direction and spiral flute geometry support efficient chip evacuation during through-hole and blind-hole reaming at standard reaming speeds and feeds for HSS tooling.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eHSS construction provides good wear resistance and toughness across a range of workpiece materials\u003c\/li\u003e\n\u003cli\u003e4 right-hand spiral flutes promote efficient chip evacuation and smooth bore finish\u003c\/li\u003e\n\u003cli\u003eNominal diameter 5\/32 inch (0.1562 inch decimal) for precise hole sizing\u003c\/li\u003e\n\u003cli\u003eBright, uncoated finish — suitable for use with standard cutting fluids\u003c\/li\u003e\n\u003cli\u003eStraight-cylindrical shank for compatibility with standard drill chucks and collet holders\u003c\/li\u003e\n\u003cli\u003eCompact 4-inch overall length with 1-inch flute length for controlled shallow reaming\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a standard chucking reamer for use in any machine tool equipped with a drill chuck or collet capable of holding a straight-cylindrical shank in the 5\/32 inch diameter range.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eChucking reamers are installed and operated by machinists using mills, drill presses, or lathes. Ensure the machine spindle is fully stopped and locked before inserting or removing the reamer from the chuck. Use appropriate cutting fluid for the workpiece material to extend tool life and improve surface finish. Always ream at reduced spindle speeds relative to drilling — consult published HSS reaming speed-and-feed tables for the specific workpiece material.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eReamer Diameter\u003c\/strong\u003e: 5\/32 inch (0.1562 inch decimal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpiral Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: HSS (High-Speed Steel)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter Range\u003c\/strong\u003e: 0.1500 to 0.1999 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.15 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23241611\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HERTEL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 2350106\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HERTEL","offers":[{"title":"Default Title","offer_id":51752946139442,"sku":"2350106","price":71.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/00252cf3f6f11c0bab191c97af040035_5e5eda6f-c1b0-4401-9dfc-ce27535c2078.jpg?v=1788931390","url":"https:\/\/voomisupply.com\/products\/hertel-2350106-chucking-reamer-5-32-in-hss-4-flute","provider":"Voomi Supply","version":"1.0","type":"link"}