{"product_id":"hertel-2341394-bridge-reamer-3-8-in-5-flute-hss","title":"Hertel 2341394 Bridge Reamer 3\/8 in 5 Flute Hss","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe HERTEL 2341394 is a bridge reamer designed for enlarging and aligning holes in structural steel and metal fabrication applications. Built from high-speed steel (HSS) with an oxide finish, it delivers a 3\/8 inch finished bore diameter using a 5-flute, left-hand spiral, right-hand cut geometry. The left-hand spiral helps push chips forward and out of the hole rather than packing them in, which is critical when working through stacked or aligned plate. The hex shank seats securely in standard drill chucks and impact-style drivers. At 4-5\/8 inches overall length with a 2-3\/4 inch flute length, it handles typical structural plate and connection work without excessive overhang.\u003c\/p\u003e\n\u003cp\u003eBridge reamers are a standard tool for ironworkers, structural steel fabricators, and heavy equipment repair technicians. This reamer is used to bring bolt holes into alignment during beam and column connections, gusset plate fitup, and similar structural assembly tasks. The small end diameter of 1\/4 inch allows it to enter a rough punched or drilled hole and progressively cut to the final 3\/8 inch diameter. The 13\/32 inch hex shank is compatible with standard hex-drive chucks used in heavy-duty drill motors common on ironworking crews.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-speed steel construction for durability across structural steel and fabricated metal work\u003c\/li\u003e\n  \u003cli\u003eLeft-hand spiral flute geometry drives chips forward, reducing clogging in deep or blind hole applications\u003c\/li\u003e\n  \u003cli\u003eRight-hand cut direction for standard forward-rotating drill motors\u003c\/li\u003e\n  \u003cli\u003e5-flute design provides a smoother finish and more cutting edges compared to 2- or 3-flute reamers\u003c\/li\u003e\n  \u003cli\u003eOxide coating improves lubricity and corrosion resistance during storage and use\u003c\/li\u003e\n  \u003cli\u003e13\/32 inch hex shank locks into hex-drive chucks without slipping under load\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement or direct-use bridge reamer for structural steel hole alignment and enlargement tasks where a 3\/8 inch finished diameter and 13\/32 inch hex shank are required.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eBridge reamers are installed and operated by ironworkers, structural fabricators, and maintenance machinists using heavy-duty corded or pneumatic drill motors with hex-drive chucks. Secure the hex shank fully in the chuck before operation and confirm the workpiece is clamped or pinned to prevent movement during reaming. Use cutting oil or an appropriate metalworking lubricant to extend tool life and improve finish quality. Always wear appropriate eye and hand protection when reaming structural steel.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReamer Type\u003c\/strong\u003e: Bridge\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReamer Diameter\u003c\/strong\u003e: 3\/8 inches (0.3750 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSmall End Diameter\u003c\/strong\u003e: 1\/4 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 13\/32 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Hex\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 2-3\/4 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 4-5\/8 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 5\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpiral Direction\u003c\/strong\u003e: Left Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: High-Speed Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Oxide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.15 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23241611\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HERTEL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 2341394\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HERTEL","offers":[{"title":"Default Title","offer_id":51748363305266,"sku":"2341394","price":84.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/6e599839ce1c883eca8a11cd0a20bc82_96888c03-e04c-46d4-9fd2-76edb3149bfe.jpg?v=1788892928","url":"https:\/\/voomisupply.com\/products\/hertel-2341394-bridge-reamer-3-8-in-5-flute-hss","provider":"Voomi Supply","version":"1.0","type":"link"}