{"product_id":"hertel-2330132-hand-reamer-1-3-8-in-10-flute-hss","title":"Hertel 2330132 Hand Reamer 1-3\/8 in 10 Flute Hss","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe HERTEL 2330132 is a spiral-flute hand reamer designed for precision hole finishing in metalworking applications. Built from high-speed steel with a bright, uncoated finish, it delivers accurate final sizing of bored or drilled holes to a 1.375-inch diameter. The 10-flute spiral geometry produces a smooth cutting action and a refined surface finish in the reamed bore. With an overall length of 12.63 inches and a straight shank, this reamer is sized for use in deep-reach finishing operations. Right-hand cutting direction with left-hand spiral fluting reduces chatter and improves chip evacuation. Machinists, tool-and-die makers, and maintenance technicians use this tool in both bench and machine-assist setups.\u003c\/p\u003e\u003cp\u003eThis hand reamer is suited for finishing holes in ferrous and non-ferrous metals, including steel, cast iron, aluminum, and brass. It is commonly used in machine shops, maintenance and repair operations, and production environments where close-tolerance hole sizing is required. The straight shank accepts standard collets and drill-chuck holders, making it compatible with a wide range of hand-turning equipment, drill presses, and manual knee mills when used at low spindle speeds.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e1.375-inch (1-3\/8 inch) reamer diameter for precise final-size finishing\u003c\/li\u003e\n\u003cli\u003e10-flute spiral design reduces chatter and improves surface finish quality\u003c\/li\u003e\n\u003cli\u003eLeft-hand spiral with right-hand cut for effective chip evacuation during reaming\u003c\/li\u003e\n\u003cli\u003eHigh-speed steel construction provides good wear resistance across a range of workpiece materials\u003c\/li\u003e\n\u003cli\u003eBright, uncoated finish suited for general-purpose reaming with cutting fluids\u003c\/li\u003e\n\u003cli\u003eStraight shank compatible with standard collets and drill chucks\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a general-purpose hand reamer for use in standard straight-shank toolholders, collet chucks, and drill-press setups requiring a 1-3\/8 inch finished bore diameter.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation and use should be performed by a qualified machinist or maintenance technician familiar with precision hole-finishing procedures. Always secure the workpiece firmly and use an appropriate cutting fluid to extend tool life and improve finish quality. Run at low RPM when used in a machine setup to prevent tool breakage and overheating. Inspect the reamer for chipping or wear before each use and do not exceed the tool's designed cutting diameter.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eReamer Diameter\u003c\/strong\u003e: 1-3\/8 inches (1.3750 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 12.63 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 6.31 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpiral Direction\u003c\/strong\u003e: Left Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: High Speed Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright, Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.15 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 27112837\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HERTEL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 2330132\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HERTEL","offers":[{"title":"Default Title","offer_id":51753811673394,"sku":"2330132","price":635.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/eab543297da38b26225447f2f5df5364_b1f08b32-ef9a-4135-9974-d854fa58989d.jpg?v=1788940917","url":"https:\/\/voomisupply.com\/products\/hertel-2330132-hand-reamer-1-3-8-in-10-flute-hss","provider":"Voomi Supply","version":"1.0","type":"link"}