{"product_id":"hertel-2296804-chucking-reamer-8-00mm-hss-6-flute","title":"Hertel 2296804 Chucking Reamer 8.00mm Hss 6 Flute","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe HERTEL 2296804 is a straight-flute chucking reamer designed to finish-size drilled or bored holes to a precise 8.00mm (0.3150 inch) diameter. Built from high-speed steel (HSS) with a bright, uncoated finish, it delivers clean, accurate bores in ferrous and non-ferrous materials. The straight-cylindrical shank seats directly in a drill chuck or collet, and the 6-flute geometry distributes cutting load evenly for a smooth, true finish. With a 6-inch overall length and a 1.5-inch flute length, it is proportioned for standard machine-shop and field reaming operations performed by machinists, toolmakers, and maintenance technicians.\u003c\/p\u003e\u003cp\u003eThis reamer is suited for through-hole and blind-hole finishing in production machining, MRO maintenance, and precision fabrication environments. It handles typical reaming allowances left after drilling in materials such as mild steel, aluminum, brass, and similar machineable alloys. The right-hand cutting direction pairs with standard CNC, manual lathe, drill press, and portable power-tool setups. Coolant or cutting oil is recommended to extend tool life and maintain surface finish quality.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e8.00mm (0.3150 inch) finished bore diameter for precise hole sizing\u003c\/li\u003e\n\u003cli\u003e6-flute straight configuration for even load distribution and smooth surface finish\u003c\/li\u003e\n\u003cli\u003eHSS construction provides good toughness across a broad range of machineable materials\u003c\/li\u003e\n\u003cli\u003eBright, uncoated finish — suitable for use with cutting fluids and standard machining lubricants\u003c\/li\u003e\n\u003cli\u003eStraight-cylindrical shank compatible with drill chucks and collet holders\u003c\/li\u003e\n\u003cli\u003eRight-hand cutting direction for use with standard clockwise-rotating spindles\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style chucking reamer for use in drill presses, lathes, CNC machining centers, and portable drilling equipment accepting a straight-cylindrical shank in the corresponding collet or chuck size.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eChucking reamers are installed and removed by qualified machinists or maintenance technicians following standard lockout\/tagout procedures before tool changes. Secure the straight-cylindrical shank firmly in the chuck or collet to prevent runout. Always apply an appropriate cutting fluid or oil during reaming to reduce heat and extend tool life. Do not use a reamer to remove excessive stock — pre-drill or bore the hole to within standard reaming allowance before use.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eReamer Diameter\u003c\/strong\u003e: 8.00mm (0.3150 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 1.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: HSS (High-Speed Steel)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDowel Pin Reamer\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOver\/Under Size Reamer\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.15 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23241611\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HERTEL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 2296804\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HERTEL","offers":[{"title":"Default Title","offer_id":51747503735090,"sku":"2296804","price":59.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/0e222dc0262bb90a42d7d2294d51da27_594753e0-29aa-4e2c-affd-c49c46e662b8.jpg?v=1788881482","url":"https:\/\/voomisupply.com\/products\/hertel-2296804-chucking-reamer-8-00mm-hss-6-flute","provider":"Voomi Supply","version":"1.0","type":"link"}