{"product_id":"hertel-2291656-chucking-reamer-size-65-0-0350-in-hss","title":"Hertel 2291656 Chucking Reamer Size 65 0.0350 in Hss","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe HERTEL 2291656 is a straight-flute chucking reamer designed for precision hole finishing in wire size 65 applications. Ground from high-speed steel (HSS) with a bright, uncoated finish, this reamer produces accurate, smooth bores at a nominal diameter of 0.0350 inches. The straight-cylindrical shank is compatible with standard drill chucks and collet holders. With an overall length of 1.5 inches and a flute length of 0.5 inches, this is a compact tool suited for close-tolerance finishing work in thin stock or shallow through-holes. Right-hand cutting direction is standard. Machinists and tool-and-die professionals reach for this style of reamer when drilling alone cannot hold the required finish or dimensional tolerance.\u003c\/p\u003e\u003cp\u003eThis reamer is applied in precision machining environments where fine wire-gauge holes require a consistent finished diameter. Typical use cases include instrument components, small mechanical assemblies, jig-and-fixture work, and any application requiring a controlled bore in the sub-0.05-inch diameter range. The straight flute geometry works well in most materials including mild steel, aluminum, brass, and plastics where chip evacuation is not a limiting factor.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eWire size 65 designation with a decimal diameter of 0.0350 inches for precise hole sizing\u003c\/li\u003e\n\u003cli\u003eHigh-speed steel (HSS) construction provides hardness and wear resistance for general machining applications\u003c\/li\u003e\n\u003cli\u003eBright, uncoated finish — no coating buildup that could affect critical bore dimensions at this small diameter\u003c\/li\u003e\n\u003cli\u003eStraight flute geometry simplifies re-sharpening and suits a broad range of workpiece materials\u003c\/li\u003e\n\u003cli\u003eStraight-cylindrical shank seats securely in drill chucks and precision collet systems\u003c\/li\u003e\n\u003cli\u003eRight-hand cutting direction; compact 1.5-inch OAL fits confined setups and short-travel spindles\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a standard chucking reamer for use in drill presses, CNC machining centers, and manual milling machines equipped with a drill chuck or collet capable of holding a straight-cylindrical shank at this diameter range.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eThis reamer is installed and used by machinists and toolroom technicians. Always secure the workpiece firmly before reaming; never attempt to ream a hole that has not been pre-drilled to the appropriate undersize. Use cutting fluid appropriate to the workpiece material to extend tool life and improve finish quality. Inspect the shank and flutes for damage before each use; a chipped or worn reamer at this small diameter can produce out-of-tolerance bores.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eReamer Diameter (Wire Size)\u003c\/strong\u003e: 65\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReamer Diameter (Decimal Inch)\u003c\/strong\u003e: 0.0350 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReamer Diameter Range\u003c\/strong\u003e: 0 - 0.0499 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: HSS (High-Speed Steel)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating \/ Finish\u003c\/strong\u003e: Bright \/ Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDowel Pin Reamer\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOver \/ Under Size Reamer\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.15 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23241611\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HERTEL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 2291656\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HERTEL","offers":[{"title":"Default Title","offer_id":51727800893746,"sku":"2291656","price":48.81,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/458d62738b8e82d3b27f8603281de774.jpg?v=1788682620","url":"https:\/\/voomisupply.com\/products\/hertel-2291656-chucking-reamer-size-65-0-0350-in-hss","provider":"Voomi Supply","version":"1.0","type":"link"}