{"product_id":"hertel-2290096-chucking-reamer-9-64-in-hss-straight-shank","title":"Hertel 2290096 Chucking Reamer 9\/64 in Hss Straight Shank","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe HERTEL 2290096 is a straight-flute chucking reamer designed to finish-size drilled holes to tight tolerances. Built from high-speed steel (HSS) with a bright, uncoated finish, it delivers clean, accurate bores in a wide range of ferrous and non-ferrous materials. The straight-cylindrical shank seats securely in standard drill chucks or collet holders, and the right-hand cutting direction suits conventional machine operation. At 4 inches overall length with a 1-inch flute, this reamer is sized for light-duty through-hole and blind-hole finishing work on drill presses, lathes, and milling machines.\u003c\/p\u003e\u003cp\u003eThis reamer is intended for machine-shop, maintenance, and toolroom applications where a 9\/64-inch (0.1406 inch decimal) finished bore diameter is required. Typical uses include sizing holes for close-fit pins, bushings, and fastener clearances in production and repair work. It is sold individually and suited for low-volume runs or single-use maintenance tasks where a dedicated finish-reaming step is required before press-fitting or assembly.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e9\/64 inch (0.1406 inch) finished bore diameter for precise hole sizing\u003c\/li\u003e\n\u003cli\u003eHigh-speed steel (HSS) construction for durability across common workpiece materials\u003c\/li\u003e\n\u003cli\u003eStraight flute geometry for smooth cutting action in through and blind holes\u003c\/li\u003e\n\u003cli\u003eBright uncoated finish — ready to use or accepts field-applied cutting fluid\u003c\/li\u003e\n\u003cli\u003eRight-hand cutting direction compatible with standard machine spindle rotation\u003c\/li\u003e\n\u003cli\u003eStraight-cylindrical shank fits standard drill chucks and collet holders\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a standard chucking reamer for use in drill presses, lathes, milling machines, and similar machine tools equipped with a drill chuck or collet capable of accepting a straight-cylindrical shank in the 9\/64-inch diameter range.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eChucking reamers are installed by machinists or toolroom technicians — power down and lock out the machine spindle before mounting or removing the tool. Secure the straight-cylindrical shank fully within the chuck or collet to prevent runout and tool pull-out during cutting. Apply an appropriate cutting fluid for the workpiece material to extend tool life and improve bore finish. Pre-drill the hole close to final size before reaming; attempting to remove excessive material with a reamer will accelerate wear and reduce accuracy.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eReamer Diameter\u003c\/strong\u003e: 9\/64 inch (0.1406 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: HSS (High-Speed Steel)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions\u003c\/strong\u003e: 0.5 x 0.5 x 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.15 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23241611\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HERTEL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 2290096\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HERTEL","offers":[{"title":"Default Title","offer_id":51728787538226,"sku":"2290096","price":48.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/560aeb02ec3ebf33aa2712c4aa7d1f31_f663253f-2a0d-4e0e-9e63-0dae5c13d8b7.jpg?v=1788696203","url":"https:\/\/voomisupply.com\/products\/hertel-2290096-chucking-reamer-9-64-in-hss-straight-shank","provider":"Voomi Supply","version":"1.0","type":"link"}