{"product_id":"hertel-16704843-drill-bit-size-48-solid-carbide-135-deg","title":"Hertel 16704843 Drill Bit Size 48 Solid Carbide 135 Deg","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe HERTEL 16704843 is a screw machine length drill bit designed for high-performance drilling in demanding industrial and machining applications. Built from solid carbide, this bit delivers the rigidity and heat resistance required when working with difficult-to-machine materials. It measures 1-11\/16 inches overall length with a matching 1-11\/16 inch flute length, making it well suited for short-reach, high-precision holes. The 135-degree split point geometry reduces walking on entry and lowers thrust requirements compared to a conventional 118-degree point. The bright\/uncoated finish is compatible with a wide range of cutting fluids. Right-hand cutting direction. Two-flute slow spiral design supports chip evacuation in tough materials.\u003c\/p\u003e\u003cp\u003eThis drill bit is intended for use in production machining environments where close-tolerance holes are required in hard or abrasive workpiece materials. The slow spiral flute geometry is specifically suited for drilling cast iron, nickel alloys, stainless steel, titanium alloys, and tool steel. It is commonly used in CNC machining centers, drill presses, and screw machine setups where a stubby, rigid tool is preferred over jobber-length alternatives to minimize deflection and maintain dimensional accuracy in precision bores.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSolid carbide construction for superior rigidity and wear resistance in hard materials\u003c\/li\u003e\n\u003cli\u003e135-degree split point reduces drill walk and cutting thrust on entry\u003c\/li\u003e\n\u003cli\u003eSlow spiral flute design optimized for chip control in cast iron, stainless steel, nickel alloy, titanium alloy, and tool steel\u003c\/li\u003e\n\u003cli\u003e1-11\/16 inch overall length in screw machine format for reduced overhang and improved stability\u003c\/li\u003e\n\u003cli\u003eBright\/uncoated finish compatible with most water-soluble and oil-based cutting fluids\u003c\/li\u003e\n\u003cli\u003eStraight cylindrical shank fits standard drill chucks and collets without modification\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a screw machine length replacement drill bit in wire gauge size 48 (0.0760 inch decimal equivalent) for use in applications requiring solid carbide tooling in the HSSC135-SS series.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation and use of carbide drill bits should be performed by qualified machinists or tooling technicians familiar with speeds, feeds, and workholding practices for carbide tooling. Ensure the spindle and chuck or collet are clean and true before seating the straight shank to prevent runout. Carbide is brittle — avoid side loading, interrupted cuts without proper setup, or drop impacts that can cause chipping or fracture. Always confirm the machine RPM and feed rate are appropriate for the workpiece material and bit diameter before beginning a cut.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Bit Size (Wire)\u003c\/strong\u003e: 48\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Bit Size (Decimal Inch)\u003c\/strong\u003e: 0.0760 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1-11\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 1-11\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 135 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Split Point\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute\/Spiral Type\u003c\/strong\u003e: Slow Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight Cylindrical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Cast Iron, Nickel Alloy, Stainless Steel, Titanium Alloy, Tool Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: HSSC135-SS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.01 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HERTEL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 16704843\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HERTEL","offers":[{"title":"Default Title","offer_id":51728879845682,"sku":"16704843","price":18.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/e4ad4bf7b239d17dfb20a6a4c4adda9d.jpg?v=1788697299","url":"https:\/\/voomisupply.com\/products\/hertel-16704843-drill-bit-size-48-solid-carbide-135-deg","provider":"Voomi Supply","version":"1.0","type":"link"}