{"product_id":"hertel-06822084-roughing-end-mill-1-1-2-in-6-flute-cobalt","title":"Hertel 06822084 Roughing End Mill 1-1\/2 in 6 Flute Cobalt","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe HERTEL 06822084 is a single-end roughing end mill designed for aggressive material removal in ferrous and non-ferrous metals. Built from M42 cobalt high-speed steel with a TiN coating, it delivers extended tool life under high-heat cutting conditions. The 1-1\/2 inch diameter cutter features 6 flutes and a 2 inch length of cut, making it well suited for hogging passes where feed rate and chip evacuation matter more than surface finish. Right-hand cut and right-hand flute direction are standard on this tool. Installed by machinists and tool-and-die professionals on CNC and manual milling equipment.\u003c\/p\u003e\n\u003cp\u003eThis end mill is intended for use in production milling operations where rapid stock removal is the primary objective. The roughing geometry breaks chips into smaller segments to reduce cutting forces and heat buildup during deep passes. The 1-1\/4 inch shank diameter fits standard collets, end mill holders, and Weldon-style tool holders commonly found in vertical and horizontal milling machines. It is not center-cutting, so it is not designed for plunge entry without a pre-drilled pilot hole. Regular length classification keeps overall reach at 4-1\/2 inches, providing good rigidity for side-milling and slotting applications.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eM42 cobalt HSS construction resists heat and wear in demanding milling applications\u003c\/li\u003e\n  \u003cli\u003eTiN coating reduces friction and extends cutting edge life\u003c\/li\u003e\n  \u003cli\u003e6-flute roughing profile breaks chips for improved evacuation and reduced cutting load\u003c\/li\u003e\n  \u003cli\u003e1-1\/4 inch shank fits standard collets and end mill holders\u003c\/li\u003e\n  \u003cli\u003eRight-hand cut, right-hand flute, single-end configuration\u003c\/li\u003e\n  \u003cli\u003eNot center-cutting — requires pilot hole or side-entry for initial engagement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement roughing end mill for use in standard vertical or horizontal milling machines accepting a 1-1\/4 inch shank diameter tool holder.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified machinist following the machine tool manufacturer guidelines for tool holding and runout tolerances. Ensure the spindle is fully stopped and the machine is locked out before changing tooling. Seat the shank fully into the holder to the recommended gauge line and torque set screws to the holder specification. Confirm runout with a dial indicator before taking the first cut.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 1-1\/2 inches (1.5 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 1-1\/4 inches (1.25 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length (OAL)\u003c\/strong\u003e: 4-1\/2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 6\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Cobalt HSS, Grade M42\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: TiN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single End\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCenter Cutting\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVariable Helix\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Regular\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.31 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 27112803\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HERTEL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 06822084\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HERTEL","offers":[{"title":"Default Title","offer_id":51753994453298,"sku":"06822084","price":225.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/2f96055551c5d79661e0f75c2c2470c1.jpg?v=1788942666","url":"https:\/\/voomisupply.com\/products\/hertel-06822084-roughing-end-mill-1-1-2-in-6-flute-cobalt","provider":"Voomi Supply","version":"1.0","type":"link"}