{"product_id":"helical-solutions-59109-corner-radius-end-mill-3-8-in-3-flute","title":"Helical Solutions 59109 Corner Radius End Mill 3\/8 in 3 Flute","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe HELICAL SOLUTIONS 59109 is a solid carbide corner radius end mill designed for high-performance material removal in aluminum and non-ferrous metal applications. It features a 3\/8 inch diameter, a 1-1\/4 inch length of cut, and a 0.0600 inch corner radius that reduces stress concentrations at part corners and extends tool life. The Zplus PVD coating is applied specifically for aluminum and non-ferrous materials, reducing built-up edge and improving surface finish. With three flutes and a medium 35-degree helix, the tool balances chip evacuation with rigidity. It is a single-end, centercutting design, meaning it can plunge as well as side-mill. Machinists and CNC operators in job shops, aerospace shops, and general manufacturing facilities are the primary users of this tool.\u003c\/p\u003e\n\u003cp\u003eThis end mill is engineered primarily for aluminum and non-ferrous metals, with secondary capability in steel, stainless steel, cast iron, high temperature alloys, and hard materials. The H35AL-3 series targets applications requiring both roughing and finishing passes in a single tool, reducing changeovers on the spindle. The straight cylindrical shank is sized at 3\/8 inch for compatibility with high-precision toolholders, which are recommended to maximize runout control given the tight TIR maximum of 0.0003 inch. Standard length geometry suits most vertical and horizontal machining center setups where extended reach is not required.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid carbide construction for rigidity and wear resistance in demanding cuts\u003c\/li\u003e\n  \u003cli\u003eZplus PVD coating optimized for aluminum and non-ferrous materials, minimizing built-up edge\u003c\/li\u003e\n  \u003cli\u003e0.0600 inch corner radius reduces corner stress and improves part surface quality\u003c\/li\u003e\n  \u003cli\u003eThree-flute, 35-degree medium helix balances chip clearance with cutting stability\u003c\/li\u003e\n  \u003cli\u003eCentercutting geometry allows direct plunge entry without a pre-drilled pilot hole\u003c\/li\u003e\n  \u003cli\u003eCapable of roughing and finishing operations, reducing tool changes\u003c\/li\u003e\n  \u003cli\u003eTIR maximum of 0.0003 inch supports tight-tolerance work when paired with high-precision toolholders\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with high-precision toolholders in CNC machining centers. Primary workpiece material is aluminum and non-ferrous metal (Material Application Code: N). Secondary workpiece materials include steel, stainless steel, cast iron, high temperature alloys, and hard materials (Codes: P, M, S, H). Part of the HELICAL SOLUTIONS H35AL-3 series.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by a machinist or CNC setup technician. The tool should be seated in a high-precision toolholder and torqued according to the toolholder manufacturer specifications to maintain the 0.0003 inch TIR maximum. Verify spindle runout with a dial indicator before beginning a production run. Do not exceed the tool's rated cutting parameters for the workpiece material, as improper feeds and speeds will void the coating benefit and accelerate wear.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 3\/8 inches (0.3750 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 3\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 1-1\/4 inches (1.2500 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.0600 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius Tolerance\u003c\/strong\u003e: -0.0020 to 0.0020 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 3-1\/2 inches (3.5000 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 3\/8 inches (0.3750 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 35 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: Zplus (PVD)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Removal Type\u003c\/strong\u003e: Roughing and Finishing\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Aluminum, Non-Ferrous Metal\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: h6\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: h6\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTIR Maximum\u003c\/strong\u003e: 0.0003 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: H35AL-3\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.165 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HELICAL SOLUTIONS\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 59109\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HELICAL SOLUTIONS","offers":[{"title":"Default Title","offer_id":51728093380914,"sku":"59109","price":95.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/9088e84b4d66df3bd62aa19a2a76d79f_eb335b19-3915-483b-92dc-4bc3a9627204.jpg?v=1788687816","url":"https:\/\/voomisupply.com\/products\/helical-solutions-59109-corner-radius-end-mill-3-8-in-3-flute","provider":"Voomi Supply","version":"1.0","type":"link"}