{"product_id":"helical-solutions-17465-ball-end-mill-1-2-in-2-flute-carbide","title":"Helical Solutions 17465 Ball End Mill 1\/2 in 2 Flute Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe HELICAL SOLUTIONS 17465 is a solid carbide ball end mill designed for milling non-ferrous metals and aluminum alloys. With a 0.500 inch mill diameter, a 1.250 inch length of cut, and a 45-degree high helix angle, this tool is built for both roughing and finishing passes in materials where chip evacuation and surface finish are critical. The bright, uncoated carbide construction suits aluminum and other non-ferrous workpiece materials where coatings can cause built-up edge. It is a single-end tool with a straight cylindrical shank and right-hand cutting and flute direction. Machinists and CNC operators in job shops, production floors, and aerospace fabrication environments are the primary users of this tool series.\u003c\/p\u003e\u003cp\u003eThis end mill is intended for use on CNC machining centers and manual mills running aluminum alloys, copper, brass, and other non-ferrous metals. The 45-degree helix promotes aggressive chip flow out of the cutting zone, reducing re-cutting and heat buildup in gummy materials. The 0.250 inch nose radius provides a true ball profile for contouring, 3D surfacing, and radius floor operations. The h6 shank and mill diameter tolerances support consistent tool holding and runout control in precision collet and end mill holders.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSolid carbide construction for rigidity and wear resistance in non-ferrous materials\u003c\/li\u003e\n\u003cli\u003e45-degree high helix angle promotes efficient chip evacuation in aluminum alloys\u003c\/li\u003e\n\u003cli\u003eTrue ball nose profile with 0.250 inch nose radius for contouring and 3D surfacing\u003c\/li\u003e\n\u003cli\u003eBright, uncoated finish prevents built-up edge on aluminum and copper alloys\u003c\/li\u003e\n\u003cli\u003eh6 shank and mill diameter tolerances for precise tool holding and low runout\u003c\/li\u003e\n\u003cli\u003eMaximum TIR of 0.0003 inch for consistent dimensional accuracy\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for roughing and finishing operations on aluminum alloys and non-ferrous metals. Suitable for use in standard straight-bore collet chucks, shrink-fit holders, and end mill holders accepting a 0.500 inch straight cylindrical shank.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified machinist or CNC setup technician. Ensure the spindle is fully stopped and locked before changing tooling. Seat the shank to the full recommended engagement depth in the tool holder to minimize deflection and maximize rigidity. Verify runout at the tool tip with a dial indicator before beginning production cuts, particularly on finish contouring operations.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.500 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 1.250 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 3.000 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.500 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNose Radius\u003c\/strong\u003e: 0.250 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 45 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight Cylindrical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single End\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Non-Ferrous Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: h6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: h6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length Tolerance\u003c\/strong\u003e: +0.0620 \/ -0.0620 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum TIR\u003c\/strong\u003e: 0.0003 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.223 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HELICAL SOLUTIONS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 17465\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HELICAL SOLUTIONS","offers":[{"title":"Default Title","offer_id":51742671765810,"sku":"17465","price":112.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/465b21ddb02bb50f264bf5d8eeb52bce_347aad6b-c6fa-4709-9449-66c494377291.jpg?v=1788838734","url":"https:\/\/voomisupply.com\/products\/helical-solutions-17465-ball-end-mill-1-2-in-2-flute-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}