{"product_id":"helical-solutions-01032-square-end-mill-1-8-in-3-flute-carbide","title":"Helical Solutions 01032 Square End Mill 1\/8 in 3 Flute Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe HELICAL SOLUTIONS 01032 is a 3-flute solid carbide square end mill designed for high-performance milling in aluminum and non-ferrous materials. With a 1\/8 inch (0.125 inch) mill diameter and a 35-degree right-hand helical flute geometry, this tool promotes efficient chip evacuation and reduces built-up edge during aluminum cuts. The Zplus coating further extends tool life by lowering friction and resisting material adhesion. At 2 inches overall length with a 3\/8 inch length of cut, the 01032 is suited for light profiling, slotting, and finishing passes in CNC machining centers and manual mills. It is center-cutting, allowing plunge entry.\u003c\/p\u003e\n\u003cp\u003eThis end mill is intended for use in aluminum, brass, plastics, and similar soft to medium non-ferrous workpiece materials. Its 3-flute configuration balances chip load and surface finish — more material removal than a 2-flute while maintaining adequate gullet space to prevent chip packing in gummy materials like aluminum. The 1\/8 inch shank matches the mill diameter, making it compatible with standard ER collet systems and small-bore tool holders. Typical applications include fixture work, prototype machining, and detail profiling on CNC routers and vertical machining centers.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid carbide construction for rigidity and wear resistance in non-ferrous applications\u003c\/li\u003e\n  \u003cli\u003e3-flute design balances chip clearance and surface finish for aluminum milling\u003c\/li\u003e\n  \u003cli\u003e35-degree right-hand helix promotes smooth chip flow and reduces cutting forces\u003c\/li\u003e\n  \u003cli\u003eZplus coating lowers friction and inhibits material adhesion on the cutting edge\u003c\/li\u003e\n  \u003cli\u003eCenter-cutting geometry allows direct plunge entry into the workpiece\u003c\/li\u003e\n  \u003cli\u003eStraight cylindrical shank fits standard ER collets and small-bore tool holders\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a direct-fit replacement end mill for standard 1\/8 inch ER collet chucks and straight-bore tool holders used in CNC vertical machining centers and CNC routers. Part of the HELICAL SOLUTIONS End Mills for Aluminum - 3 Flute - Square - 35 Degree Helix series.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified machinist or CNC setup technician. Ensure the spindle is fully stopped and the machine is in an E-stop or powered-down state before loading or unloading the tool. Seat the shank fully into the collet to the recommended grip length — insufficient engagement increases runout and risk of pull-out under cutting loads. Verify collet nut torque per the tool holder manufacturer specification before beginning a cut.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.125 inches (1\/8 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 3\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.375 inches (3\/8 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.125 inches (1\/8 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating \/ Finish\u003c\/strong\u003e: Zplus\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 35 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Helical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCenter Cutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVariable Helix\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVariable Index\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChipbreaker\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: End Mills for Aluminum - 3 Flute - Square - 35 Degree Helix\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.013 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HELICAL SOLUTIONS\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 01032\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HELICAL SOLUTIONS","offers":[{"title":"Default Title","offer_id":51735264493874,"sku":"01032","price":42.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/f44da248eba5cbb0356f375832547885_faa01f7f-c22d-4e78-b5cd-79ad8b9497d0.jpg?v=1788771194","url":"https:\/\/voomisupply.com\/products\/helical-solutions-01032-square-end-mill-1-8-in-3-flute-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}