{"product_id":"harvey-tool-991702-c3-drill-mill-2-flute-60-point-carbide","title":"Harvey Tool 991702-C3 Drill Mill 2 Flute 60 Point Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe HARVEY TOOL 991702-C3 is a solid carbide drill mill designed for combined drilling and milling operations in a single tool. With a 60-degree point angle and 2 flutes, it drills entry holes and transitions directly into profile or slot milling without a tool change. The cutting diameter is 0.0312 inches, making it suited for fine-detail work in ferrous and non-ferrous materials. The AlTiN coating improves heat resistance and extends tool life in dry or semi-dry cutting conditions. Licensed machinists and CNC programmers specify this tool when tight tolerances and minimal tool changes are priorities in production or prototype environments.\u003c\/p\u003e\n\u003cp\u003eThis drill mill fits applications requiring small-diameter combined drilling and end milling, including mold and die work, medical component machining, and precision aerospace part production. The 3\/32-inch length of cut and 1\/8-inch shank diameter make it compatible with standard collet chucks and small-bore toolholders commonly found on CNC machining centers and vertical mills. The 1-1\/2-inch overall length provides adequate reach for most shallow-pocket and surface-feature applications.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid carbide construction for rigidity and wear resistance in demanding cuts\u003c\/li\u003e\n  \u003cli\u003e60-degree point angle enables accurate drill entry before transitioning to milling\u003c\/li\u003e\n  \u003cli\u003eAlTiN coating provides high-temperature oxidation resistance for extended tool life\u003c\/li\u003e\n  \u003cli\u003e2-flute geometry supports chip evacuation in both drilling and milling modes\u003c\/li\u003e\n  \u003cli\u003e0.0312-inch cutting diameter suits fine-feature and small-scale machining work\u003c\/li\u003e\n  \u003cli\u003e1\/8-inch shank fits standard collet and toolholder systems without adapters\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in CNC machining centers and manual vertical mills accepting a 1\/8-inch shank collet or toolholder. Suitable for ferrous and non-ferrous materials where an AlTiN coating is appropriate.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by a machinist or CNC setup technician. Ensure the machine spindle is fully stopped and locked out before inserting or removing the tool from the collet. Seat the shank fully to the depth mark or toolholder specification and torque the collet nut per the toolholder manufacturer guidelines. Verify runout with a dial indicator after seating, as small-diameter carbide tools are sensitive to concentricity errors that can cause premature breakage.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Diameter\u003c\/strong\u003e: 0.0312 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.0930 inches (3\/32 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1.5 inches (1-1\/2 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.1250 inches (1\/8 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Angle\u003c\/strong\u003e: 60 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: AlTiN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.01 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23241600\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HARVEY TOOL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 991702-C3\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HARVEY TOOL","offers":[{"title":"Default Title","offer_id":51742139154738,"sku":"991702-C3","price":75.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/a1cf6c5696c9b682c1f1a89691e79f03.jpg?v=1788835506","url":"https:\/\/voomisupply.com\/products\/harvey-tool-991702-c3-drill-mill-2-flute-60-point-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}