{"product_id":"harvey-tool-988920-woodruff-keyseat-cutter-solid-carbide","title":"Harvey Tool 988920 Woodruff Keyseat Cutter Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe HARVEY TOOL 988920 is a solid carbide Woodruff keyseat cutter designed for milling keyseat slots in shafts and mating components. It features a 0.5-inch cut diameter, a narrow 0.047-inch cutting width, and a 1\/2-inch straight shank. With 6 straight teeth and a bright uncoated finish, this cutter is built for accurate, repeatable keyseat profiles in steel, stainless steel, and cast iron. Machinists and toolroom technicians use it for precision slotting operations on manual mills and CNC machining centers where tight tolerances on keyway width and depth are required.\u003c\/p\u003e\n\u003cp\u003eThis cutter is suited for ferrous and non-ferrous applications including steel, stainless steel, cast iron, non-ferrous metals, superalloys, titanium, and hard materials. Its 0.25-inch neck diameter and 0.75-inch neck length provide clearance for reaching keyseat locations recessed from the end of a shaft without interference from the shank body. The 3-inch overall length supports reach into deeper workpiece setups common in shaft and hub assemblies.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid carbide construction for rigidity and wear resistance in ferrous and hard materials\u003c\/li\u003e\n  \u003cli\u003e0.5-inch cut diameter with 0.047-inch cutting width for narrow, precise keyseat profiles\u003c\/li\u003e\n  \u003cli\u003e6 straight teeth for clean slot geometry in steel, stainless steel, and cast iron\u003c\/li\u003e\n  \u003cli\u003e0.25-inch neck diameter with 0.75-inch neck length for clearance in recessed keyseat locations\u003c\/li\u003e\n  \u003cli\u003eBright uncoated finish suitable for use with cutting fluid across a range of workpiece materials\u003c\/li\u003e\n  \u003cli\u003e1\/2-inch shank diameter for standard ER or side-lock toolholding systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use on vertical milling machines and CNC machining centers accepting a 1\/2-inch straight shank. Primary workpiece materials include steel, stainless steel, and cast iron. Secondary workpiece materials include non-ferrous metals, superalloys, titanium, and hard materials.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation requires a collet chuck, side-lock holder, or Weldon-style toolholder accepting a 1\/2-inch shank. Confirm the holder is clean and undamaged before seating the cutter. Secure the workpiece rigidly in a vise or fixture before engaging the cut, and verify spindle speed and feed rate against the cutter manufacturer recommendations for the workpiece material. Do not exceed the rated cutting width in a single pass without confirming the setup can handle the resulting radial load.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCut Diameter\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Width\u003c\/strong\u003e: 0.047 inches (1.20 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNeck Diameter\u003c\/strong\u003e: 0.25 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNeck Length\u003c\/strong\u003e: 0.75 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 3 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Teeth\u003c\/strong\u003e: 6\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTooth Configuration\u003c\/strong\u003e: Straight\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutter Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Materials\u003c\/strong\u003e: Steel, Stainless Steel, Cast Iron\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSecondary Workpiece Materials\u003c\/strong\u003e: Non-Ferrous Metal, Superalloys and Titanium, Hard Material\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeldon Flat\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConnection Type\u003c\/strong\u003e: Shank\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.31 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23241631\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HARVEY TOOL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 988920\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HARVEY TOOL","offers":[{"title":"Default Title","offer_id":51735334551858,"sku":"988920","price":204.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/cb519c61c24f0891285e71b30870e9f2_e7cc79f5-24c6-4dd2-a9be-037d6b5bb488.jpg?v=1788771939","url":"https:\/\/voomisupply.com\/products\/harvey-tool-988920-woodruff-keyseat-cutter-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}