{"product_id":"harvey-tool-984145-c6-corner-radius-end-mill-2mm-3-flute","title":"Harvey Tool 984145-C6 Corner Radius End Mill 2mm 3 Flute","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe HARVEY TOOL 984145-C6 is a solid carbide corner radius end mill engineered for demanding material removal in high-temperature alloys, stainless steel, steel, cast iron, and hard materials. The 2 mm cutting diameter features a 0.20 mm corner radius and a 3.00 mm length of cut, producing a controlled edge blend that reduces chipping and extends tool life in tough workpiece materials. A variable helix geometry promotes chip evacuation and dampens vibration during both roughing and finishing passes. The AlTiN PVD coating provides thermal resistance and hardness retention at elevated cutting temperatures. This is a single-end, centercutting tool installed in high-precision toolholders by machinists and CNC operators working in job shop and production environments.\u003c\/p\u003e\n\u003cp\u003eThis end mill is suited for short-reach applications where a 2 mm diameter and 3.00 mm length of cut are appropriate for slot milling, profiling, and contouring in steel, stainless steel, cast iron, and hard alloys. The 4.00 mm straight-cylindrical shank mounts directly into collet chucks and shrink-fit or press-fit high-precision toolholders. Right-hand cutting and right-hand flute direction follow conventional milling orientation. The short length type makes this tool well-suited for rigid setups where deflection control is critical when machining difficult materials.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eVariable helix design reduces vibration and improves chip flow during roughing and finishing\u003c\/li\u003e\n  \u003cli\u003e0.20 mm corner radius protects the cutting edge and improves surface finish at part corners\u003c\/li\u003e\n  \u003cli\u003eAlTiN PVD coating delivers high thermal resistance for cutting high-temp alloys and hard materials\u003c\/li\u003e\n  \u003cli\u003eSolid carbide construction provides rigidity and wear resistance in demanding applications\u003c\/li\u003e\n  \u003cli\u003eCentercutting geometry allows plunge entry into workpiece material\u003c\/li\u003e\n  \u003cli\u003eRight-hand spiral flutes with normal pitch support conventional milling in a wide range of setups\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with high-precision toolholders including collet chucks and shrink-fit holders accepting a 4.00 mm straight-cylindrical shank. Intended for machining steel, stainless steel, cast iron, and hard alloys per material codes P, M, K, and H. Part of the Harvey Tool Variable Helix End Mills for High Temp Alloys - Corner Radius series and the Material Specific End Mills series.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by a qualified machinist or CNC setup technician. Ensure the machine spindle is fully stopped and the tool changer or spindle is locked out before mounting or removing the tool. Seat the shank fully into the toolholder to the specified gauge length before tightening to avoid runout. Verify toolholder cleanliness and shank condition prior to installation, as contamination or surface damage will affect runout and tool life.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 2.00 mm (0.0787 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.20 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 3\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 3.00 mm (0.1181 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 50.00 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 4.00 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 34 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: AlTiN (PVD)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Type\u003c\/strong\u003e: Corner Radius\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVariable Helix\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChipbreaker\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Short\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Removal Type\u003c\/strong\u003e: Roughing and Finishing\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Materials\u003c\/strong\u003e: Steel, Stainless Steel, Cast Iron, Hard Alloy\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: 0.00 \/ -0.02 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius Tolerance\u003c\/strong\u003e: +0.025 to -0.025 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: h6\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length Tolerance\u003c\/strong\u003e: +0.25 \/ -0.00 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.02 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 27112803\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HARVEY TOOL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 984145-C6\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HARVEY TOOL","offers":[{"title":"Default Title","offer_id":51739444969778,"sku":"984145-C6","price":73.83,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/6a64bbe92bc48e9d4bc473f6d0d752b1_6c8f2e22-ce0c-4a65-8363-96e3137ce1a1.jpg?v=1788814666","url":"https:\/\/voomisupply.com\/products\/harvey-tool-984145-c6-corner-radius-end-mill-2mm-3-flute","provider":"Voomi Supply","version":"1.0","type":"link"}