{"product_id":"harvey-tool-984024-c3-ball-end-mill-0-375-in-4-flute-carbide","title":"Harvey Tool 984024-C3 Ball End Mill 0.375 in 4 Flute Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe HARVEY TOOL 984024-C3 is a single-end ball end mill designed for precision milling operations in metalworking and machining applications. Built from solid carbide with an AlTiN coating, this tool delivers hardness and heat resistance suited to cutting ferrous and non-ferrous materials at elevated speeds. The 0.375 inch cutting diameter and 4-flute configuration support smooth finishes and efficient chip evacuation in contoured, profiling, and 3D surface milling work. At 2.5 inches overall length with a 3\/8 inch shank, it mounts into standard toolholders found on vertical and horizontal CNC machining centers. This end mill is installed and operated by machinists and CNC technicians in job shop and production environments.\u003c\/p\u003e\u003cp\u003eThis end mill is suited for profiling, slotting, and finishing passes on complex contoured surfaces in both roughing and finishing applications. The 0.349 inch length of cut, 0.5 inch neck length, and reduced neck diameter of 0.1719 inches allow access to deeper pockets and tight-clearance features without sacrificing rigidity. Right-hand flute direction and right-hand cutting orientation are standard for conventional CNC machining center setups. The 300-degree wrap angle supports consistent radial engagement across contoured tool paths.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSolid carbide construction provides rigidity and wear resistance for demanding milling operations\u003c\/li\u003e\n\u003cli\u003eAlTiN coating increases surface hardness and thermal resistance, extending tool life in dry and high-speed cutting\u003c\/li\u003e\n\u003cli\u003e4-flute geometry supports efficient chip removal and improved surface finish on finish passes\u003c\/li\u003e\n\u003cli\u003eReduced neck diameter of 0.1719 inches enables deep pocket and tight-clearance access\u003c\/li\u003e\n\u003cli\u003eSingle-end design with 3\/8 inch shank fits standard collet and end mill holders\u003c\/li\u003e\n\u003cli\u003eRight-hand cut and flute direction compatible with standard CNC machining center spindle rotation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use in CNC machining centers and manual mills accepting a 3\/8 inch shank end mill. Suitable for standard ER collets, side-lock holders, and shrink-fit toolholders sized for 3\/8 inch shanks.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified machinist or CNC technician. Power down the spindle and confirm the machine is in a safe, locked-out state before changing tooling. Seat the shank fully into the toolholder to the minimum insertion depth recommended by the toolholder manufacturer to maintain runout tolerances. Inspect the cutting edges and coating for chips or damage before mounting; do not use a damaged end mill.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.375 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.349 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.375 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeck Length\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeck Diameter\u003c\/strong\u003e: 0.1719 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: AlTiN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWrap Angle\u003c\/strong\u003e: 300 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Helix\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Index\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.14 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HARVEY TOOL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 984024-C3\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HARVEY TOOL","offers":[{"title":"Default Title","offer_id":51744663699762,"sku":"984024-C3","price":234.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/c542e0aad1b22d61452165e847ab0002_6115758e-84e5-4777-9dd6-8c367d22a369.jpg?v=1788859717","url":"https:\/\/voomisupply.com\/products\/harvey-tool-984024-c3-ball-end-mill-0-375-in-4-flute-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}