{"product_id":"harvey-tool-982193-square-end-mill-3-32-in-3-flute-carbide","title":"Harvey Tool 982193 Square End Mill 3\/32 in 3 Flute Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe HARVEY TOOL 982193 is a solid carbide square end mill designed for precision milling in a wide range of metal and non-ferrous materials. With a 3\/32 inch (0.093 inch) cutting diameter and a 0.139 inch length of cut, this three-flute tool delivers a balance of chip evacuation and surface finish quality in light to moderate cutting applications. The 30-degree helix angle promotes smooth cutting action and efficient chip flow. The bright, uncoated finish makes it well suited for materials where coating adhesion is not required or where coating cost is not justified. Machinists and tool-and-die professionals install this end mill in CNC machining centers and manual knee mills alike.\u003c\/p\u003e\u003cp\u003eThis end mill fits standard 1\/8 inch collets and tool holders, making it a practical choice for shops already equipped for small-diameter tooling. The 2.5 inch overall length and 0.95 inch reach length allow access to moderately deep features without excessive overhang. The extended reach geometry supports operations where a standard-reach tool would interfere with a workpiece fixture or cavity wall. Right-hand cut and right-hand flute direction are standard for conventional and climb milling on most CNC equipment.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e3\/32 inch (0.093 inch) cutting diameter for fine-detail milling operations\u003c\/li\u003e\n\u003cli\u003eThree flutes provide a balance of chip clearance and finish quality\u003c\/li\u003e\n\u003cli\u003e30-degree helix angle for smooth, efficient cutting action\u003c\/li\u003e\n\u003cli\u003eCenter-cutting capable — suitable for plunge entries\u003c\/li\u003e\n\u003cli\u003eExtended reach design with 0.95 inch reach length for deeper feature access\u003c\/li\u003e\n\u003cli\u003eBright\/uncoated finish — no coating buildup risk on sensitive workpiece materials\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use in standard 1\/8 inch collet chucks and end mill holders on CNC machining centers and manual milling machines. Suitable for applications requiring a small-diameter square end mill with a 0.139 inch length of cut.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified machinist following the machine tool manufacturer torque and runout specifications for the collet or tool holder in use. Ensure the spindle is fully powered down and locked before changing tooling. Verify collet condition and cleanliness before seating the shank to prevent runout that can cause premature tool failure at this diameter. Small-diameter carbide end mills are brittle — avoid side-loading beyond the rated depth of cut.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 3\/32 inch (0.093 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.139 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 1\/8 inch (0.125 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReach Length\u003c\/strong\u003e: 0.95 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Helix\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Type\u003c\/strong\u003e: Single End\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.02 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HARVEY TOOL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 982193\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HARVEY TOOL","offers":[{"title":"Default Title","offer_id":51728611213618,"sku":"982193","price":75.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/9cf084c8d4615dcb426071d44e4f84ff.jpg?v=1788693952","url":"https:\/\/voomisupply.com\/products\/harvey-tool-982193-square-end-mill-3-32-in-3-flute-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}