{"product_id":"harvey-tool-980020-c3-woodruff-keyseat-cutter-solid-carbide","title":"Harvey Tool 980020-C3 Woodruff Keyseat Cutter Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe HARVEY TOOL 980020-C3 is a solid carbide Woodruff keyseat cutter designed to machine semicircular keyseats in shafts and mating bores. It features a 0.1875-inch cut diameter, a 0.02-inch cut width, and a 3\/16-inch shank diameter with a 2-inch overall length. The six-tooth straight configuration and AlTiN coating make this cutter well suited for aggressive material removal in steel, stainless steel, and cast iron, as well as non-ferrous metals, superalloys, titanium, and hard materials. Machinists and tool-and-die professionals install this cutter on manual or CNC milling machines where precise keyseat geometry is required.\u003c\/p\u003e\n\u003cp\u003eThis cutter is used in machine shops, job shops, and maintenance environments where Woodruff-style keyseat profiles must be cut to close tolerances. Its compact neck diameter of 0.062 inches and short neck length of 0.093 inches allow it to reach into tight geometries while maintaining rigidity. The shank connects directly to the spindle via standard shank-style toolholding without a Weldon flat, making setup straightforward on most milling setups.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid carbide construction for rigidity and wear resistance in ferrous and non-ferrous materials\u003c\/li\u003e\n  \u003cli\u003eAlTiN coating provides heat resistance and extended tool life in steel, stainless steel, cast iron, superalloys, and hard materials\u003c\/li\u003e\n  \u003cli\u003e0.1875-inch cut diameter and 0.02-inch cut width for precision Woodruff keyseat profiles\u003c\/li\u003e\n  \u003cli\u003eSix straight teeth deliver consistent chip load and surface finish\u003c\/li\u003e\n  \u003cli\u003eCompact neck geometry (0.062-inch diameter, 0.093-inch length) allows access to confined keyseat locations\u003c\/li\u003e\n  \u003cli\u003e3\/16-inch shank diameter fits standard collets and toolholders without a Weldon flat\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style Woodruff keyseat cutter for use in manual and CNC milling machine setups that accept a 3\/16-inch shank. Primary workpiece materials include steel, stainless steel, and cast iron; secondary materials include non-ferrous metals, superalloys, titanium, and hard materials.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by a qualified machinist. Secure the 3\/16-inch shank in a properly sized collet or toolholder and verify runout before cutting. Power down and lock out the spindle before making any toolholder changes. Do not exceed the cutter's rated depth of cut or feed rate for the workpiece material being machined.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCut Diameter\u003c\/strong\u003e: 0.1875 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCut Width\u003c\/strong\u003e: 0.02 inches (0.50 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.1875 inches (3\/16 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNeck Diameter\u003c\/strong\u003e: 0.062 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNeck Length\u003c\/strong\u003e: 0.093 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Teeth\u003c\/strong\u003e: 6\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTooth Configuration\u003c\/strong\u003e: Straight\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutter Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: AlTiN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeldon Flat\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Materials\u003c\/strong\u003e: Steel, Stainless Steel, Cast Iron\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSecondary Workpiece Materials\u003c\/strong\u003e: Non-Ferrous Metal, Superalloys, Titanium, Hard Material\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConnection Type\u003c\/strong\u003e: Shank\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.03 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HARVEY TOOL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 980020-C3\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HARVEY TOOL","offers":[{"title":"Default Title","offer_id":51730322620722,"sku":"980020-C3","price":115.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/7f8260aff7fcbf035c65a387295d7d88_e037d940-9ee6-46fa-bae9-9cffec4eb0da.jpg?v=1788715350","url":"https:\/\/voomisupply.com\/products\/harvey-tool-980020-c3-woodruff-keyseat-cutter-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}