{"product_id":"harvey-tool-968108-engraving-cutter-90-deg-1-8-in-carbide","title":"Harvey Tool 968108 Engraving Cutter 90 Deg 1\/8 in Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe HARVEY TOOL 968108 is a solid carbide engraving cutter designed for precision engraving, marking, and detail work on ferrous and non-ferrous metals. Built with a 90-degree included angle and a pointed tip geometry, this cutter produces clean, sharp V-groove cuts with consistent edge definition. The uncoated solid carbide construction provides the rigidity and hardness required for demanding metalworking applications. With a 1\/8 inch diameter, a 0.062 inch length of cut, and a 3 inch overall length, the 968108 fits standard toolholding setups used in CNC machining centers and engraving machines. It is installed and operated by machinists and CNC technicians.\u003c\/p\u003e\n\u003cp\u003eThis engraving cutter is suited for use on ferrous metals such as steel and cast iron as well as non-ferrous metals including aluminum, brass, and copper. The 90-degree point angle makes it well matched for V-engraving, part marking, and fine-detail contouring on flat or contoured metal surfaces. The 1\/8 inch shank diameter allows direct installation into standard collet chucks and toolholders commonly found on CNC routers, engraving machines, and vertical machining centers. Its compact cutting geometry is appropriate for high-precision, low-depth applications where burr-free edge quality is required.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e90-degree included angle with pointed tip for sharp, defined V-groove engraving\u003c\/li\u003e\n  \u003cli\u003eSolid carbide construction for rigidity and wear resistance on metallic workpieces\u003c\/li\u003e\n  \u003cli\u003eUncoated finish suitable for ferrous and non-ferrous metal applications\u003c\/li\u003e\n  \u003cli\u003e0.062 inch length of cut for controlled, shallow engraving passes\u003c\/li\u003e\n  \u003cli\u003e1\/8 inch shank diameter for compatibility with standard collet toolholding\u003c\/li\u003e\n  \u003cli\u003e2-flute, right-hand cutting geometry for clean chip evacuation and smooth surface finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use on ferrous and non-ferrous metals. Fits standard 1\/8 inch collet chucks and toolholders on CNC engraving machines and machining centers.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified machinist or CNC technician. Power down and lock out the machine before inserting or removing the cutter from the toolholder. Ensure the shank is fully seated and the collet nut is properly tightened before operation. Verify spindle speed and feed rate settings are appropriate for the workpiece material before running the program.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutter Diameter\u003c\/strong\u003e: 1\/8 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncluded Angle\u003c\/strong\u003e: 90 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Shape\u003c\/strong\u003e: Pointed\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.062 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 3 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 1\/8 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutter Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Application\u003c\/strong\u003e: Ferrous and Non-Ferrous Metals\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.02 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HARVEY TOOL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 968108\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HARVEY TOOL","offers":[{"title":"Default Title","offer_id":51729641668914,"sku":"968108","price":50.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/b3617bd014b46bf905880cf07004e3f5_85cdd067-d091-4c2a-9452-cb3d98540c1d.jpg?v=1788707095","url":"https:\/\/voomisupply.com\/products\/harvey-tool-968108-engraving-cutter-90-deg-1-8-in-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}