{"product_id":"harvey-tool-966324-square-end-mill-0-375-in-2-flute-downcut","title":"Harvey Tool 966324 Square End Mill 0.375 in 2 Flute Downcut","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe HARVEY TOOL 966324 is a solid carbide square end mill designed for precision milling in metal, wood, composite, and plastic applications. With a 0.375 inch cutter diameter and a 0.563 inch length of cut, this tool delivers clean, controlled material removal in a compact cutting envelope. The downcut flute geometry directs chips upward and pushes workpiece material downward, reducing surface tearout and edge delamination on the top face of the cut. A 20-degree helix angle balances cutting efficiency with edge stability. This end mill is a single-end tool with right-hand cut and right-hand flute orientation, suited for CNC machining centers and manual mills operated by machinists and tooling professionals.\u003c\/p\u003e\u003cp\u003eThe 966324 is well-suited for climb and conventional milling passes where top-surface finish quality is a priority, such as laminate trimming, wood routing, composite panel work, and light ferrous or non-ferrous metal profiling. The 0.375 inch shank diameter matches standard ER collet and end mill holder tooling commonly found in both vertical machining centers and CNC router spindles. At 3 inches overall length with a 0.375 inch shank, the tool fits standard tool holders without extended-reach adapters in most benchtop and production machine setups.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eDowncut flute geometry minimizes top-surface tearout and delamination\u003c\/li\u003e\n\u003cli\u003eSolid carbide construction provides rigidity and wear resistance over high-speed tool paths\u003c\/li\u003e\n\u003cli\u003e20-degree helix angle balances chip evacuation with cutting edge durability\u003c\/li\u003e\n\u003cli\u003eSingle-end design with right-hand cut for standard CNC and manual mill operation\u003c\/li\u003e\n\u003cli\u003eBright uncoated finish suitable for a wide range of workpiece materials\u003c\/li\u003e\n\u003cli\u003e0.375 inch shank fits standard ER collets and end mill holders\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a standard-shank square end mill compatible with 0.375 inch ER collet systems and end mill holders used in CNC vertical machining centers and CNC router spindles.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation and tool changes must be performed with the machine fully powered down and spindle at rest. Seat the shank fully into the collet or holder and torque the retention nut to the tool holder specification before operation. Inspect the cutting edges and shank for chips or runout before each use. Tool grinding, regrinding, or modification should only be performed by qualified tooling personnel with appropriate grinding equipment.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutter Diameter\u003c\/strong\u003e: 0.375 inches (3\/8 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.563 inches (9\/16 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.375 inches (3\/8 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Downcut\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 20 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Type\u003c\/strong\u003e: Single End\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Orientation\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.17 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 27112803\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HARVEY TOOL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 966324\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HARVEY TOOL","offers":[{"title":"Default Title","offer_id":51728881254706,"sku":"966324","price":170.83,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/48d1d673dbf58444a8270de539639505_6672cdca-247f-404d-bdfb-57ca4b2611c6.jpg?v=1788697318","url":"https:\/\/voomisupply.com\/products\/harvey-tool-966324-square-end-mill-0-375-in-2-flute-downcut","provider":"Voomi Supply","version":"1.0","type":"link"}