{"product_id":"harvey-tool-962832-square-end-mill-1-2-in-4-flute-cvd-diamond","title":"Harvey Tool 962832 Square End Mill 1\/2 in 4 Flute Cvd Diamond","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe HARVEY TOOL 962832 is a solid carbide square end mill designed for high-performance milling in abrasive and composite materials. With a 1\/2 inch mill diameter, 3\/4 inch length of cut, and a CVD diamond coating, this tool delivers exceptional wear resistance and surface finish in demanding cutting environments. The four-flute, right-hand cutting geometry with a 30-degree helix angle promotes efficient chip evacuation and stable cutting action. A matching 1\/2 inch shank diameter provides solid tool holding in standard collets and end mill holders. Licensed machinists and CNC operators specify this end mill for production runs where tool life and dimensional accuracy are critical.\u003c\/p\u003e\u003cp\u003eThis end mill is suited for machining graphite, carbon fiber reinforced polymers, fiberglass, ceramics, and other highly abrasive non-ferrous materials where conventional coatings fail prematurely. The CVD diamond coating is applied by chemical vapor deposition, bonding directly to the carbide substrate for superior adhesion compared to PVD alternatives. At 3 inches overall length with a single-end configuration and no extended reach, it fits standard spindle setups on vertical machining centers and CNC routers handling composite or technical ceramic components.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCVD diamond coating for maximum wear resistance in abrasive materials\u003c\/li\u003e\n\u003cli\u003eSolid carbide substrate for rigidity and dimensional stability\u003c\/li\u003e\n\u003cli\u003e4-flute right-hand geometry with 30-degree helix angle for efficient chip flow\u003c\/li\u003e\n\u003cli\u003eCentercutting design allows plunge entry into workpiece\u003c\/li\u003e\n\u003cli\u003e1\/2 inch shank diameter fits standard ER collets and end mill holders\u003c\/li\u003e\n\u003cli\u003eSingle-end, fixed-length configuration for consistent tool offsets\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style replacement or direct-use solid carbide end mill for CNC machining centers and routers accepting 1\/2 inch straight shank tooling.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified machinist or CNC tooling technician. Ensure the spindle is fully stopped and the machine is in an appropriate lock-out condition before changing tooling. Seat the shank fully and evenly in the collet or holder to the recommended grip depth before torquing the retention nut. Inspect the CVD diamond coating for chips or delamination before each use, as a damaged coating edge can accelerate tool wear and compromise workpiece surface quality.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: CVD Diamond\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfiguration\u003c\/strong\u003e: Single End\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Helix\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.31 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 27112803\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HARVEY TOOL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 962832\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HARVEY TOOL","offers":[{"title":"Default Title","offer_id":51733066187058,"sku":"962832","price":509.33,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/c8ec0c7d1b391b5008bbc46e0347b545_7fa0a145-8715-4bac-9546-22c9608414dc.jpg?v=1788751071","url":"https:\/\/voomisupply.com\/products\/harvey-tool-962832-square-end-mill-1-2-in-4-flute-cvd-diamond","provider":"Voomi Supply","version":"1.0","type":"link"}