{"product_id":"harvey-tool-942332-square-end-mill-1-2-in-3-flute-carbide","title":"Harvey Tool 942332 Square End Mill 1\/2 in 3 Flute Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe HARVEY TOOL 942332 is a solid carbide square end mill designed for precision milling operations in ferrous and non-ferrous materials. With a 0.5-inch cutting diameter, a 1.5-inch length of cut, and a 42-degree variable helix geometry, this tool reduces chatter and improves chip evacuation during aggressive cuts. It is single-ended, center-cutting, and runs right-hand cut with right-hand flutes. The 3-flute configuration balances chip load and surface finish, making it well suited for slots, pockets, and profiling passes. CNC machinists and tool-and-die professionals are the primary users of this cutter.\u003c\/p\u003e\u003cp\u003eThis end mill is built for use in vertical and horizontal machining centers as well as manual mills with appropriate spindle speeds and feed rates. The 0.5-inch shank diameter fits standard ER and side-lock toolholders common in production and job-shop environments. The 3-inch overall length gives sufficient reach for typical milled features without excessive overhang. The uncoated carbide substrate is appropriate for cutting aluminum, plastics, and a range of ferrous materials where coating is not required or where re-grinding is planned.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e42-degree variable helix reduces harmonics and chatter during cut\u003c\/li\u003e\n\u003cli\u003eCenter-cutting geometry allows direct plunge entry into workpiece\u003c\/li\u003e\n\u003cli\u003e3-flute design balances chip clearance with surface finish quality\u003c\/li\u003e\n\u003cli\u003eSolid carbide construction provides rigidity and tool life in demanding applications\u003c\/li\u003e\n\u003cli\u003eRight-hand cut and right-hand flute configuration for standard spindle use\u003c\/li\u003e\n\u003cli\u003eUncoated finish suitable for aluminum, plastics, and re-grindable applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style solid carbide square end mill suitable for standard 1\/2-inch shank toolholders on CNC machining centers and manual mills.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation and tool changes must be performed with the spindle fully stopped and the machine in an e-stop or powered-down state. Secure the shank fully into the toolholder to the recommended gauge-line depth before torquing the collet nut or set screw. A licensed machinist or qualified CNC operator should verify speeds, feeds, and depth-of-cut parameters before running the tool. Inspect the cutting edges and shank for damage before each use.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 1.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 42 degrees variable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions\u003c\/strong\u003e: 3.31 inches L x 0.51 inches W x 0.51 inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.3 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HARVEY TOOL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 942332\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HARVEY TOOL","offers":[{"title":"Default Title","offer_id":51727094874418,"sku":"942332","price":83.33,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/15f0b69b18571c434ab711846c94a738.jpg?v=1788673220","url":"https:\/\/voomisupply.com\/products\/harvey-tool-942332-square-end-mill-1-2-in-3-flute-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}