{"product_id":"harvey-tool-942262-c4-square-end-mill-1-16-in-3-flute-carbide","title":"Harvey Tool 942262-C4 Square End Mill 1\/16 in 3 Flute Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe HARVEY TOOL 942262-C4 is a solid carbide square end mill engineered for cutting aluminum and non-ferrous materials. This single-end tool runs a 1\/16 inch (0.0625 inch) mill diameter with a 0.186 inch length of cut and a 1\/8 inch shank diameter. The overall length measures 1.5 inches. Three flutes with a 42-degree variable helix geometry help evacuate chips efficiently and reduce chatter during high-speed passes in aluminum alloys. The amorphous diamond PVD coating adds surface hardness and lubricity, extending tool life in abrasive non-ferrous applications. The cutter is center-cutting and runs right-hand cutting and flute direction, making it suitable for conventional plunge and side-milling operations.\u003c\/p\u003e\n\u003cp\u003eThis end mill is intended for machining aluminum alloys and other non-ferrous materials in milling centers, CNC routers, and manual mills capable of the high spindle speeds these small-diameter tools require. The compact 1\/16 inch diameter makes it well suited for fine-detail work, narrow slots, and contour passes in parts where larger tools cannot reach. It is used in job shops, production shops, and toolrooms by machinists and CNC operators running aluminum components that demand clean surface finishes and tight tolerances.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid carbide construction for rigidity and wear resistance in non-ferrous cutting\u003c\/li\u003e\n  \u003cli\u003eAmorphous diamond PVD coating reduces friction and extends tool life in aluminum\u003c\/li\u003e\n  \u003cli\u003e42-degree variable helix geometry minimizes chatter and improves chip flow\u003c\/li\u003e\n  \u003cli\u003eCenter-cutting design allows direct plunge entry into workpiece material\u003c\/li\u003e\n  \u003cli\u003eRight-hand cut and right-hand spiral flute direction for standard CNC mill setups\u003c\/li\u003e\n  \u003cli\u003eSingle-end configuration with 1\/8 inch shank for use in standard collets and end mill holders\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in the HARVEY TOOL Variable Helix End Mills for Aluminum Alloys - Square series. Primary workpiece material is aluminum and non-ferrous metals (material code N). Fits standard 1\/8 inch collets and end mill holders.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation and tool changes should be performed by qualified machinists with the machine powered down and locked out per facility lockout\/tagout procedures. Ensure the 1\/8 inch shank is fully seated and properly torqued in the collet or holder before operation. Small-diameter carbide end mills are brittle  -  avoid side-loading beyond recommended parameters and do not use this tool on ferrous materials. Verify spindle runout is within acceptable limits before running a new tool at full depth of cut.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 1\/16 inch (0.0625 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.186 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 1\/8 inch (0.125 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 3\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 42 degrees variable\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: Amorphous Diamond (PVD Diamond)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCenter Cutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single End\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Aluminum and Non-Ferrous\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.01 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HARVEY TOOL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 942262-C4\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HARVEY TOOL","offers":[{"title":"Default Title","offer_id":51740379808050,"sku":"942262-C4","price":78.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/d3c3ec3373ce682f3f0a522e0f845011.jpg?v=1788824634","url":"https:\/\/voomisupply.com\/products\/harvey-tool-942262-c4-square-end-mill-1-16-in-3-flute-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}