{"product_id":"harvey-tool-941160-c3-corner-radius-end-mill-1-4-in-4-fl","title":"Harvey Tool 941160-C3 Corner Radius End Mill 1\/4 in 4 Fl","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe HARVEY TOOL 941160-C3 is a solid carbide corner radius end mill designed for precision milling in demanding metalworking applications. With a 1\/4 inch mill diameter, 0.06 inch corner radius, and 4 helical flutes, this single-end tool delivers both roughing and finishing capability in one pass. The AlTiN (PVD) coating provides elevated heat resistance and wear protection, making it well-suited for ferrous and hard materials. The straight cylindrical shank measures 1\/4 inch in diameter, and the tool runs right-hand cut and right-hand flute direction with a 30-degree helix angle and normal pitch. Overall length is 2.5 inches with a 3\/8 inch length of cut.\u003c\/p\u003e\n\u003cp\u003eThis end mill is built for shops and field machinists working in steel, stainless steel, cast iron, non-ferrous metals, and composite materials. The stub and standard geometry of the Miniature End Mills series makes it appropriate for tight clearance setups and small-feature profiling. Its centercutting design allows plunge entry, and the AlTiN coating supports dry or minimal-lubrication cutting strategies common in high-speed machining environments. Licensed machinists and CNC programmers will find this tool at home in vertical machining centers and manual knee mills running standard toolholders.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid carbide construction for rigidity and long tool life in hard materials\u003c\/li\u003e\n  \u003cli\u003eAlTiN PVD coating for high heat resistance and reduced tool wear\u003c\/li\u003e\n  \u003cli\u003e0.06 inch corner radius reduces stress concentration and improves edge strength at workpiece corners\u003c\/li\u003e\n  \u003cli\u003eCentercutting design enables direct plunge entry without a pre-drilled hole\u003c\/li\u003e\n  \u003cli\u003e4 helical flutes with right-hand cut support efficient chip evacuation and surface finish\u003c\/li\u003e\n  \u003cli\u003eCapable of both roughing and finishing material removal in a single setup\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with standard straight-bore toolholders accepting a 1\/4 inch shank. Suitable for machining steel, stainless steel, cast iron, non-ferrous metals, and composite workpiece materials. Part of the Harvey Tool Miniature End Mills - Corner Radius - Stub and Standard series.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by qualified machinists or CNC setup technicians. Power down and lock out the spindle before loading or changing tooling. Seat the 1\/4 inch shank fully and evenly in the toolholder collet and torque to the toolholder manufacturer's specification using the appropriate wrench. Verify runout with a dial indicator before beginning a cut, particularly when operating at high spindle speeds or tight tolerances.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 1\/4 inch (0.2500 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.06 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius Tolerance\u003c\/strong\u003e: +0.0010 to -0.0010 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: 0.0000 to -0.0020 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 3\/8 inch (0.3750 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length Tolerance\u003c\/strong\u003e: +0.0100 to -0.0000 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 1\/4 inch (0.2500 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Type\u003c\/strong\u003e: Corner Radius\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Configuration\u003c\/strong\u003e: Single End\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChipbreaker\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: AlTiN (PVD)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Materials\u003c\/strong\u003e: Steel, Stainless Steel, Cast Iron, Non-Ferrous Metal, Composite\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Removal Type\u003c\/strong\u003e: Roughing and Finishing\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Short\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: Miniature End Mills - Corner Radius - Stub and Standard\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.06 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HARVEY TOOL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 941160-C3\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HARVEY TOOL","offers":[{"title":"Default Title","offer_id":51729521443122,"sku":"941160-C3","price":75.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/fe9dfb4bd777927aee3a1c807088ea9b_550590ca-ba9e-4810-bafd-50c7ac840d78.jpg?v=1788705640","url":"https:\/\/voomisupply.com\/products\/harvey-tool-941160-c3-corner-radius-end-mill-1-4-in-4-fl","provider":"Voomi Supply","version":"1.0","type":"link"}