{"product_id":"harvey-tool-934893-square-end-mill-3-32-in-3-flute-carbide","title":"Harvey Tool 934893 Square End Mill 3\/32 in 3 Flute Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe HARVEY TOOL 934893 is a solid carbide square end mill designed for precision milling in metal, composites, and engineered materials. With a 3\/32-inch (0.093 inch) cutting diameter and a 0.139-inch length of cut, this tool is built for tight-tolerance work in confined geometries. Three flutes and a 30-degree right-hand helix deliver efficient chip evacuation while maintaining a strong cutting edge. The bright, uncoated finish suits general-purpose applications where coating is not required. This end mill is a single-end, center-cutting tool, meaning it can be used for both peripheral and plunge operations. It is installed and operated by machinists, tool and die makers, and precision fabricators.\u003c\/p\u003e\u003cp\u003eThis end mill is suited for use in CNC machining centers and manual milling machines where small-diameter, fine-detail cutting is required. The extended reach design, with a 0.67-inch reach length, allows access to pockets and slots that standard short-reach tools cannot reach. The 1\/8-inch shank fits standard ER collets and end mill holders commonly found in light machining setups. Typical applications include slot milling, profiling, and pocket cutting in small-part production environments.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e3\/32-inch cutting diameter for fine detail and small-feature milling\u003c\/li\u003e\n\u003cli\u003eSolid carbide construction provides rigidity and wear resistance\u003c\/li\u003e\n\u003cli\u003e3-flute geometry balances chip clearance and edge strength\u003c\/li\u003e\n\u003cli\u003e30-degree right-hand helix promotes smooth cutting and efficient chip flow\u003c\/li\u003e\n\u003cli\u003eCenter-cutting capable  -  supports both plunge and peripheral milling\u003c\/li\u003e\n\u003cli\u003eExtended reach at 0.67 inches for access to deep or confined features\u003c\/li\u003e\n\u003cli\u003eBright\/uncoated finish suitable for general-purpose dry or wet cutting\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use with 1\/8-inch ER collets and standard end mill holders in CNC and manual milling machines requiring small-diameter square end mills.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified machinist familiar with proper tool holding and runout requirements for small-diameter carbide end mills. Ensure the spindle and collet are clean and free of debris before seating the shank. Small-diameter carbide tools are brittle  -  avoid side-loading beyond the tool manufacturer's recommended depth of cut and do not use worn or damaged holders. Verify spindle speed and feed rate settings are appropriate for the workpiece material before initiating the cut.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 3\/32 inch (0.093 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.139 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 1\/8 inch (0.125 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReach Length\u003c\/strong\u003e: 0.67 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Helix\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Type\u003c\/strong\u003e: Single End\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.02 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HARVEY TOOL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 934893\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HARVEY TOOL","offers":[{"title":"Default Title","offer_id":51740393308466,"sku":"934893","price":73.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/c865f016673071a17b9765fb629011f4_9b255dcf-2ab8-4281-8d15-95c2c3b59513.jpg?v=1788824712","url":"https:\/\/voomisupply.com\/products\/harvey-tool-934893-square-end-mill-3-32-in-3-flute-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}