{"product_id":"harvey-tool-931016-c3-dovetail-cutter-90-deg-solid-carbide","title":"Harvey Tool 931016-C3 Dovetail Cutter 90 Deg Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe HARVEY TOOL 931016-C3 is a solid carbide dovetail cutter designed for milling undercut dovetail slots and angled features in a wide range of workpiece materials. Built with a 90-degree included angle and a 1\/4 inch cutter diameter, this tool cuts a 1\/16 inch (0.0625 inch) width in a single pass. The 2-tooth geometry keeps chip load manageable at the small diameter, and the Titanium Aluminum Nitride (TiAlN) coating improves heat resistance and tool life during dry or light-lubrication cutting. The 1\/4 inch shank fits standard collet chucks on CNC machining centers and manual mills.\u003c\/p\u003e\n\u003cp\u003eThis cutter is suited for light-duty dovetail slot work in aluminum, steel, stainless, and engineering plastics where a 90-degree undercut profile is required. Typical applications include T-slot prep, locking-feature machining, and part fixturing geometry on CNC mills. The small 1\/16 inch cut width makes it well suited for fine detail dovetails in tight-tolerance workpieces. Machinists working on prototype runs and production fixturing will find the geometry and coating combination practical for both materials.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e90-degree included angle for standard dovetail undercut profiles\u003c\/li\u003e\n  \u003cli\u003eSolid carbide construction for rigidity and wear resistance at small diameters\u003c\/li\u003e\n  \u003cli\u003eTiAlN coating for improved heat resistance and extended tool life\u003c\/li\u003e\n  \u003cli\u003e2-flute design optimized for chip clearance at 1\/4 inch cutter diameter\u003c\/li\u003e\n  \u003cli\u003e0.010 inch corner radius reduces stress concentration at the cutting edge\u003c\/li\u003e\n  \u003cli\u003e1\/4 inch shank for compatibility with standard ER and end mill collet systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in CNC machining centers and manual knee mills equipped with a standard 1\/4 inch collet or end mill holder. No specific machine model compatibility data was provided by the manufacturer for this SKU.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation and operation of this tool should be performed by a qualified machinist familiar with CNC or manual milling practices. Secure the 1\/4 inch shank fully in a collet or end mill holder with adequate clamping force before spindle operation. Confirm spindle speed and feed rate are within the manufacturer-recommended parameters for the cutter diameter and workpiece material before engaging the cut. Never exceed the maximum depth of cut for the tool geometry, and inspect the cutting edges for wear or chipping before each use.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncluded Angle\u003c\/strong\u003e: 90 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutter Diameter\u003c\/strong\u003e: 0.2500 inches (1\/4 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCut Width\u003c\/strong\u003e: 0.0620 inches (1\/16 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 1\/4 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length (OAL)\u003c\/strong\u003e: 2.0000 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Teeth\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.0100 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutter Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Titanium Aluminum Nitride (TiAlN)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.05 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HARVEY TOOL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 931016-C3\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HARVEY TOOL","offers":[{"title":"Default Title","offer_id":51731937493298,"sku":"931016-C3","price":208.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/2f6bb016eb3da1f8caf6bfc657506a14_3e83f3b2-1c6e-4921-8db2-852f6a8f2703.jpg?v=1788736904","url":"https:\/\/voomisupply.com\/products\/harvey-tool-931016-c3-dovetail-cutter-90-deg-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}