{"product_id":"harvey-tool-922908-ball-end-mill-0-125-in-4-flute-carbide","title":"Harvey Tool 922908 Ball End Mill 0.125 in 4 Flute Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe HARVEY TOOL 922908 is a solid carbide ball end mill designed for precision milling in ferrous and non-ferrous materials. With a 0.125-inch (1\/8-inch) mill diameter and a 0.106-inch length of cut, this tool is built for finishing passes, profiling, and contour work where tight tolerances and fine surface finish matter. The 4-flute geometry and 270-degree wrap angle promote chip evacuation and stable cutting at high feed rates. The bright uncoated finish suits general-purpose applications across a wide range of workpiece materials. Machinists, tool-and-die makers, and CNC operators are the primary users of this tool.\u003c\/p\u003e\n\u003cp\u003eThis end mill is suited for CNC machining centers, vertical mills, and precision bench mills running tight-tolerance part programs. Its 0.125-inch shank diameter and 2-inch overall length make it compatible with standard collet toolholding systems. The 0.625-inch neck length and 0.076-inch neck diameter allow access into pockets, slots, and sculpted surfaces without interference from the tool holder. Right-hand flute direction and right-hand cutting direction are standard for conventional spindle rotation. This tool is a single-end configuration, meaning it is replaced rather than flipped when worn.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid carbide construction for rigidity and wear resistance in demanding cuts\u003c\/li\u003e\n  \u003cli\u003e0.125-inch ball nose diameter enables tight-radius contouring and 3D profiling\u003c\/li\u003e\n  \u003cli\u003e4-flute design balances chip clearance with surface finish quality\u003c\/li\u003e\n  \u003cli\u003e0.625-inch neck length provides reach into deep pockets with reduced deflection risk\u003c\/li\u003e\n  \u003cli\u003eBright uncoated finish suitable for a broad range of materials including aluminum and plastics\u003c\/li\u003e\n  \u003cli\u003eRight-hand cut and right-hand helix for standard CNC spindle compatibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in standard 1\/8-inch collet toolholding systems on CNC machining centers and manual vertical mills requiring a single-end ball nose end mill with a 0.125-inch shank diameter.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by qualified machinists or CNC setup technicians. Ensure the spindle is fully stopped and the machine is in an e-stop or powered-down state before changing tooling. Use a calibrated torque wrench and the appropriate collet nut wrench when seating the shank in the collet to avoid under- or over-tightening. Verify tool runout with a dial indicator after installation, as excessive runout on a tool of this diameter will accelerate wear and degrade surface finish.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.125 inches (1\/8 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.106 inches (2.70 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.125 inches (1\/8 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNeck Length\u003c\/strong\u003e: 0.625 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNeck Diameter\u003c\/strong\u003e: 0.076 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWrap Angle\u003c\/strong\u003e: 270 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVariable Helix\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVariable Index\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.01 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 27112803\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HARVEY TOOL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 922908\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HARVEY TOOL","offers":[{"title":"Default Title","offer_id":51733018575154,"sku":"922908","price":83.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/cf3eecd4f71ed7d82f9a8581e84c6290_accad15b-d780-4646-836d-75e277c7b0a6.jpg?v=1788750543","url":"https:\/\/voomisupply.com\/products\/harvey-tool-922908-ball-end-mill-0-125-in-4-flute-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}