{"product_id":"harvey-tool-910070-woodruff-keyseat-cutter-1-in-solid-carbide","title":"Harvey Tool 910070 Woodruff Keyseat Cutter 1 in Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe HARVEY TOOL 910070 is a Woodruff keyseat cutter designed for milling keyseat slots in rotating shafts. It features a 1-inch cut diameter and a 0.25-inch cut width, making it suited for cutting standard Woodruff key profiles in a single pass. The cutter is constructed from brazed solid carbide with a bright, uncoated finish and carries 12 straight teeth for clean, accurate slot geometry. The 0.5-inch shank diameter provides secure tool holding in standard milling chucks and collets. Machinists and tool-and-die professionals install this cutter in vertical or horizontal milling machines for precision keyseat work.\u003c\/p\u003e\n\u003cp\u003eThis cutter is intended for use on steel, stainless steel, and cast iron as primary workpiece materials, with secondary suitability for non-ferrous metals, superalloys, titanium, and hard materials. At 3.25 inches overall length with a 0.5-inch shank, it fits standard milling setups without requiring extended-reach adapters in most keyseat applications. The straight-tooth configuration is well suited for conventional milling operations where chip evacuation and slot finish are priorities.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eBrazed solid carbide construction for rigidity and wear resistance in ferrous and non-ferrous materials\u003c\/li\u003e\n  \u003cli\u003e1-inch cut diameter with 0.25-inch cut width for Woodruff keyseat profiles\u003c\/li\u003e\n  \u003cli\u003e12 straight teeth for consistent chip load and slot surface finish\u003c\/li\u003e\n  \u003cli\u003e0.030-inch corner radius for controlled edge geometry at slot shoulders\u003c\/li\u003e\n  \u003cli\u003eBright, uncoated finish suitable for a broad range of workpiece materials\u003c\/li\u003e\n  \u003cli\u003e0.5-inch shank with no Weldon flat for use in standard collet or end mill holders\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style keyseat cutter compatible with primary workpiece materials including steel, stainless steel, and cast iron, and secondary materials including non-ferrous metals, superalloys, titanium, and hard materials.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eThis cutter is installed by machinists and tool-and-die professionals in vertical or horizontal milling machines. Secure the 0.5-inch shank in a properly sized collet or end mill holder and confirm runout before cutting. Power down and de-energize the machine spindle completely before changing or adjusting tooling. Follow shop safety protocols and machine manufacturer guidelines for feed rate and spindle speed selection based on workpiece material.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCut Diameter\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCut Width\u003c\/strong\u003e: 0.25 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 3.25 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Teeth\u003c\/strong\u003e: 12\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTooth Configuration\u003c\/strong\u003e: Straight\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.030 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutter Material\u003c\/strong\u003e: Brazed Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeldon Flat\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Materials\u003c\/strong\u003e: Steel, Stainless Steel, Cast Iron\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSecondary Workpiece Materials\u003c\/strong\u003e: Non-Ferrous Metal, Superalloys, Titanium, Hard Material\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConnection Type\u003c\/strong\u003e: Shank\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1.65 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HARVEY TOOL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 910070\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HARVEY TOOL","offers":[{"title":"Default Title","offer_id":51754894623026,"sku":"910070","price":265.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/123ec67abd431c508a3138b235c2dfc4_1c87ce2d-a58f-42f1-a93d-eb7171d5e256.jpg?v=1788949585","url":"https:\/\/voomisupply.com\/products\/harvey-tool-910070-woodruff-keyseat-cutter-1-in-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}