{"product_id":"harvey-tool-836325-square-end-mill-0-025-in-3-flute-carbide","title":"Harvey Tool 836325 Square End Mill 0.025 in 3 Flute Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe HARVEY TOOL 836325 is a square end mill designed for precision milling in tight tolerances and small-feature applications. Built from solid carbide, this tool delivers the rigidity and wear resistance needed for cutting ferrous and non-ferrous materials at high speeds. The 0.025-inch cutting diameter, 3-flute geometry, and 30-degree helix angle combine to support efficient chip evacuation and smooth finishes in micro-milling operations. With a bright, uncoated finish, this end mill is well suited for aluminum, brass, plastics, and other materials where coating adhesion is unnecessary or undesirable. Centercutting capability allows both plunge and peripheral cuts.\u003c\/p\u003e\n\u003cp\u003eThis end mill is used in CNC machining centers and high-speed spindle setups where small-diameter tooling is required. Typical applications include mold and die work, medical device components, electronics enclosures, and precision prototype machining. The 1\/8-inch shank diameter makes it compatible with standard collet systems found on vertical machining centers and CNC routers. The 1.5-inch overall length keeps the tool stiff enough for accurate cuts at this diameter range, reducing deflection and chatter in the cut zone.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e0.025-inch cutting diameter for micro-milling and fine-detail work\u003c\/li\u003e\n  \u003cli\u003eSolid carbide construction for rigidity and extended tool life\u003c\/li\u003e\n  \u003cli\u003e3-flute design supports chip evacuation in small-feature cuts\u003c\/li\u003e\n  \u003cli\u003e30-degree helix angle balances cutting forces and surface finish\u003c\/li\u003e\n  \u003cli\u003eCentercutting geometry enables plunge entry without a pre-drilled hole\u003c\/li\u003e\n  \u003cli\u003eBright, uncoated finish suitable for non-ferrous metals, plastics, and similar materials\u003c\/li\u003e\n  \u003cli\u003eRight-hand cut and right-hand flute direction for standard CNC spindle setups\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with standard 1\/8-inch collet systems on CNC vertical machining centers, high-speed spindles, and CNC routers requiring small-diameter square end mills.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation and tool changes should be performed by a qualified machinist or CNC operator with the spindle fully stopped and machine power locked out. Seat the shank fully into the collet and torque the collet nut to the specification listed by the collet manufacturer. At this diameter, tool runout must be minimized before cutting to prevent premature breakage. Always verify spindle speed and feed rate settings against the tool manufacturer's recommendations before beginning a cut.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Diameter\u003c\/strong\u003e: 0.025 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 3\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.075 inches (1.9 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.125 inches (1\/8 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVariable Helix\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.01 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 27112803\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HARVEY TOOL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 836325\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HARVEY TOOL","offers":[{"title":"Default Title","offer_id":51728180773170,"sku":"836325","price":41.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/5c96247132d19a5254664b32cd20791c_55f94dc9-f6a6-40e2-bd89-c2393d9c3c2f.jpg?v=1788689085","url":"https:\/\/voomisupply.com\/products\/harvey-tool-836325-square-end-mill-0-025-in-3-flute-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}