{"product_id":"harvey-tool-826862-square-end-mill-1-16-in-4-flute-carbide","title":"Harvey Tool 826862 Square End Mill 1\/16 in 4 Flute Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe HARVEY TOOL 826862 is a solid carbide square end mill designed for precision milling in tight-tolerance applications. With a 0.0625-inch cutting diameter and a 0.5-inch length of cut, this tool removes material cleanly in small-profile features such as slots, pockets, and contours. The 4-flute geometry and 30-degree helix angle improve chip evacuation and surface finish compared to 2-flute tools. The bright, uncoated finish suits a broad range of ferrous and non-ferrous materials without added coating cost. This end mill is a single-end tool with right-hand cut and right-hand flute orientation. Licensed machinists and CNC operators are the primary users.\u003c\/p\u003e\u003cp\u003eThis end mill is suited for CNC machining centers and manual mills handling small-feature work where dimensional accuracy is critical. The 0.125-inch shank diameter fits standard collets sized for 1\/8-inch tooling. At 2.5 inches overall length, it reaches into moderate-depth setups without excessive overhang. Typical applications include die and mold work, prototype machining, medical components, and precision aerospace parts where small-diameter tooling is required.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e0.0625-inch cutting diameter for fine-detail and small-feature milling\u003c\/li\u003e\n\u003cli\u003eSolid carbide construction for rigidity and wear resistance\u003c\/li\u003e\n\u003cli\u003e4-flute design improves finish quality and feed rate potential\u003c\/li\u003e\n\u003cli\u003e30-degree helix angle promotes efficient chip flow\u003c\/li\u003e\n\u003cli\u003eCentercutting capability allows plunge entry into workpieces\u003c\/li\u003e\n\u003cli\u003eRight-hand cut and right-hand flute, standard CNC orientation\u003c\/li\u003e\n\u003cli\u003eBright, uncoated finish compatible with a wide range of workpiece materials\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use in CNC machining centers and manual mills equipped with collets or tool holders accepting a 1\/8-inch shank diameter.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation requires a clean, properly sized collet or end mill holder rated for 1\/8-inch shank tooling. Ensure the machine spindle is fully stopped and the tool path is programmed before engaging the workpiece. Verify runout with a dial indicator after seating the tool, as small-diameter carbide end mills are sensitive to collet concentricity. Follow the tool manufacturer and machine builder guidelines for speed and feed parameters appropriate to the workpiece material.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Diameter\u003c\/strong\u003e: 0.0625 inches (1\/16 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.5 inches (1\/2 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.125 inches (1\/8 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright, Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Helix\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.02 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HARVEY TOOL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 826862\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HARVEY TOOL","offers":[{"title":"Default Title","offer_id":51747585261874,"sku":"826862","price":63.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/1932675e3d76af073c6658861fbe0bec.jpg?v=1788882937","url":"https:\/\/voomisupply.com\/products\/harvey-tool-826862-square-end-mill-1-16-in-4-flute-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}