{"product_id":"harvey-tool-824708-c3-engraving-cutter-60-deg-1-8-in-solid-carbide","title":"Harvey Tool 824708-C3 Engraving Cutter 60 Deg 1\/8 in Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe HARVEY TOOL 824708-C3 is a single-flute solid carbide engraving cutter designed for precise marking, engraving, and detailing operations on both ferrous and non-ferrous metals. It features a 60-degree included angle with a tipped-off point geometry and a 0.01-inch tip diameter for fine line definition. The cutter is coated with AlTiN (aluminum titanium nitride) for enhanced heat resistance and tool life in metal cutting applications. With a 1\/8-inch shank and a 1-1\/2-inch overall length, this tool is suited for use in CNC machining centers and engraving machines where tight tolerances and clean detail work are required.\u003c\/p\u003e\u003cp\u003eThis engraving cutter is intended for use on ferrous and non-ferrous metals in CNC engraving, part marking, and decorative or functional detail work. The right-hand cutting direction and tipped-off point make it appropriate for applications where a flat-bottom trace or controlled tip engagement is needed. The 0.1-inch length of cut limits depth of engagement, keeping the tool rigid and reducing deflection during fine engraving passes. It is commonly used in job shops, tool rooms, and production environments where accurate, repeatable engraving on metal workpieces is required.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e60-degree included angle with tipped-off point for controlled line width and flat-bottom engraving\u003c\/li\u003e\n\u003cli\u003e0.01-inch tip diameter enables fine detail and narrow line engraving\u003c\/li\u003e\n\u003cli\u003eAlTiN coating provides heat and wear resistance in ferrous and non-ferrous metal applications\u003c\/li\u003e\n\u003cli\u003eSolid carbide construction for rigidity and dimensional stability\u003c\/li\u003e\n\u003cli\u003eSingle-flute design promotes chip clearance in shallow engraving cuts\u003c\/li\u003e\n\u003cli\u003eRight-hand cutting direction, compatible with standard CNC spindle rotation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use on ferrous and non-ferrous metals with a 1\/8-inch shank compatible with standard collet chucks and tool holders used in CNC engraving machines and machining centers.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified CNC machinist or tool room technician. Ensure the machine spindle is fully stopped and the tool holder is clean and free of debris before seating the shank. Secure the cutter in a collet or end mill holder appropriate for a 1\/8-inch shank diameter and verify runout before beginning a cut. Follow the machine manufacturer guidelines and applicable shop safety procedures when setting depth of cut and feed rates.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutter Diameter\u003c\/strong\u003e: 0.125 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip Diameter\u003c\/strong\u003e: 0.01 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Angle\u003c\/strong\u003e: 60 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoint Shape\u003c\/strong\u003e: Tipped Off\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.1 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.125 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutter Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: AlTiN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Application\u003c\/strong\u003e: Ferrous and Non-Ferrous Metals\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.01 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HARVEY TOOL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 824708-C3\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HARVEY TOOL","offers":[{"title":"Default Title","offer_id":51754936762674,"sku":"824708-C3","price":51.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/b36fd367d56537e17b26a28d560fe0e6_586c4a36-e0ed-487d-8231-322282d79179.jpg?v=1788949947","url":"https:\/\/voomisupply.com\/products\/harvey-tool-824708-c3-engraving-cutter-60-deg-1-8-in-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}