{"product_id":"harvey-tool-823114-square-end-mill-7-32-in-3-flute-carbide","title":"Harvey Tool 823114 Square End Mill 7\/32 in 3 Flute Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe HARVEY TOOL 823114 is a solid carbide square end mill designed for precision milling operations in metal, composites, and engineered plastics. With a 7\/32 inch (0.2187 inch) cutting diameter and a 21\/64 inch (0.330 inch) length of cut, this tool delivers sharp, square shoulders and flat-bottom features in a single-end configuration. The 3-flute geometry balances chip evacuation with surface finish quality, making it well-suited for finishing passes and slotting in harder workpiece materials. It weighs approximately 0.06 pounds. Machinists and toolroom professionals install this end mill in CNC machining centers and manual knee mills.\u003c\/p\u003e\n\u003cp\u003eThis end mill is intended for use in production and toolroom environments where tight tolerances and consistent geometry are required. The right-hand cut and right-hand flute direction are standard for conventional CNC setups. With a 1\/4 inch shank diameter and a 2-1\/2 inch overall length, it fits standard ER and set-screw style tool holders commonly used in vertical machining centers. The 30-degree helix angle supports smooth cutting action across a range of ferrous and non-ferrous materials. It is a single-end tool sold individually.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid carbide construction for rigidity and wear resistance in demanding cuts\u003c\/li\u003e\n  \u003cli\u003e7\/32 inch cutting diameter with 21\/64 inch length of cut for shallow-to-mid-depth features\u003c\/li\u003e\n  \u003cli\u003e3-flute design balances chip clearance and finish quality\u003c\/li\u003e\n  \u003cli\u003e30-degree helix angle for smooth, efficient cutting action\u003c\/li\u003e\n  \u003cli\u003eCentercutting geometry allows plunge entry into the workpiece\u003c\/li\u003e\n  \u003cli\u003eBright\/uncoated finish compatible with a wide range of cutting fluids and materials\u003c\/li\u003e\n  \u003cli\u003eRight-hand cut and right-hand flute direction for standard CNC spindle compatibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style solid carbide square end mill suitable for use in standard 1\/4 inch ER collet chucks, set-screw end mill holders, and Weldon-style tool holders on CNC machining centers and manual mills.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified machinist following the tool holder manufacturer's torque and runout specifications. Ensure the spindle is fully stopped and the machine is in a safe state before changing tooling. Solid carbide end mills are brittle and should not be dropped or subjected to side impacts during handling. Confirm holder bore cleanliness and proper tool stick-out before beginning any cutting operation.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 7\/32 inch (0.2187 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 21\/64 inch (0.330 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2-1\/2 inches (2.5 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 1\/4 inch (0.25 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 3\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVariable Helix\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConfiguration\u003c\/strong\u003e: Single End\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.06 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 27112803\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HARVEY TOOL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 823114\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HARVEY TOOL","offers":[{"title":"Default Title","offer_id":51744667435314,"sku":"823114","price":38.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/5d4e9e48649cff082b6d35283cbe783d_74fe605b-4f2e-436f-90e8-19e3da989604.jpg?v=1788859769","url":"https:\/\/voomisupply.com\/products\/harvey-tool-823114-square-end-mill-7-32-in-3-flute-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}