{"product_id":"harvey-tool-802462-c3-square-end-mill-1-16-in-4-flute-carbide","title":"Harvey Tool 802462-C3 Square End Mill 1\/16 in 4 Flute Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe HARVEY TOOL 802462-C3 is a 4-flute solid carbide square end mill engineered for precision milling in ferrous and non-ferrous materials. With a 0.062-inch cutting diameter and a 0.186-inch length of cut, this tool is built for tight-tolerance work in confined pockets and fine-detail profiles. The AlTiN coating provides heat resistance and wear protection at elevated cutting speeds. A 30-degree helix angle promotes efficient chip evacuation while reducing cutting forces. Machinists and CNC operators working with small-diameter tooling will find this mill suited to demanding finish and semi-finish passes in hardened or abrasive workpiece materials.\u003c\/p\u003e\u003cp\u003eThis end mill is intended for small-footprint milling operations where minimal runout and sharp edge definition are critical. The 0.125-inch shank diameter fits standard ER collet chucks and end mill holders commonly found on vertical machining centers and CNC mills. Its 1.5-inch overall length keeps deflection low, which is essential at this diameter. The centercutting geometry allows plunge entry without a pre-drilled pilot hole, adding flexibility in 3-axis toolpath strategies.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e0.062-inch cutting diameter with 0.186-inch length of cut for fine-detail milling\u003c\/li\u003e\n\u003cli\u003eAlTiN finish improves heat resistance and extends tool life in abrasive materials\u003c\/li\u003e\n\u003cli\u003e30-degree helix angle promotes smooth cutting action and chip evacuation\u003c\/li\u003e\n\u003cli\u003eCentercutting design allows direct plunge entry without a pilot hole\u003c\/li\u003e\n\u003cli\u003eRight-hand cut, right-hand flute configuration standard for CNC milling spindles\u003c\/li\u003e\n\u003cli\u003eSolid carbide construction provides rigidity and dimensional stability at small diameters\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use in standard 0.125-inch shank ER collet chucks and end mill holders on CNC vertical machining centers and similar milling platforms.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified machinist or CNC operator. Ensure the spindle is fully stopped and the machine is in an e-stop or lock-out condition before changing tooling. Seat the shank fully into the collet or holder and torque the retention nut to the toolholder specification. At this diameter, verify runout with a dial indicator before cutting, as excess runout accelerates wear and increases the risk of tool breakage.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Diameter\u003c\/strong\u003e: 0.062 inches (1\/16 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.186 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut Range\u003c\/strong\u003e: 0.100 - 0.200 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.125 inches (1\/8 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReach Length\u003c\/strong\u003e: 0.375 inches (3\/8 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Helix\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: AlTiN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Type\u003c\/strong\u003e: Single End\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions\u003c\/strong\u003e: 2.36 x 0.32 x 0.32 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.02 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HARVEY TOOL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 802462-C3\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HARVEY TOOL","offers":[{"title":"Default Title","offer_id":51732492386610,"sku":"802462-C3","price":77.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/16122d5bf61e65dd80256262417bd622_aa058766-0189-4859-98ea-51cca6764e1d.jpg?v=1788743536","url":"https:\/\/voomisupply.com\/products\/harvey-tool-802462-c3-square-end-mill-1-16-in-4-flute-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}