{"product_id":"harvey-tool-802431-square-end-mill-1-32-in-4-flute-carbide","title":"Harvey Tool 802431 Square End Mill 1\/32 in 4 Flute Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe HARVEY TOOL 802431 is a 4-flute, solid carbide square end mill designed for precise milling in tight-tolerance applications. With a mill diameter of 1\/32 inch (0.031 inches), a length of cut of 3\/32 inch (0.093 inches), and an overall length of 1-1\/2 inches, this miniature end mill is built for small-feature machining where rigidity and accuracy are critical. A 30-degree helix angle improves chip evacuation and reduces cutting forces. The bright\/uncoated finish suits a range of workpiece materials. Machinists and toolmakers working on CNC mills install this tool for fine detail work, micro slots, and contour passes requiring a small-diameter cutting profile.\u003c\/p\u003e\u003cp\u003eThis end mill fits applications demanding fine detail in small cavities, slots, and contours. The 1\/8-inch shank diameter (0.125 inches) works with standard collets and end mill holders on CNC machining centers and manual mills. The extended-reach design, with a reach length of 3\/16 inch (0.187 inches), gives clearance for deeper pockets without sacrificing stability. Single-end configuration means the tool is replaced rather than reversed when the cutting edge wears. Suitable for light finishing and semi-finishing passes in ferrous and non-ferrous metals, plastics, and composites.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e1\/32 inch (0.031 inches) mill diameter for small-feature and micro-slot work\u003c\/li\u003e\n\u003cli\u003e4-flute geometry for improved finish quality and feed rate capability\u003c\/li\u003e\n\u003cli\u003e30-degree helix angle promotes efficient chip evacuation\u003c\/li\u003e\n\u003cli\u003eSolid carbide construction for rigidity and wear resistance at small diameters\u003c\/li\u003e\n\u003cli\u003eCentercutting design allows plunge entry into workpiece\u003c\/li\u003e\n\u003cli\u003eExtended reach with 3\/16 inch reach length for deeper pocket access\u003c\/li\u003e\n\u003cli\u003eBright\/uncoated finish compatible with a broad range of materials\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a direct-fit replacement for standard 1\/8-inch shank collets and end mill holders on CNC machining centers and manual milling machines requiring a 1\/32-inch diameter square end mill.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation is performed by qualified machinists or CNC setup technicians. Ensure the spindle is fully stopped and the machine is powered down before changing tooling. Secure the shank firmly in a clean, properly sized collet or end mill holder to the tool holder manufacturer's specified clamping procedure. Verify runout with a dial indicator before beginning the cut, as runout is especially consequential at small diameters.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 1\/32 inch (0.031 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 3\/32 inch (0.093 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 1\/8 inch (0.125 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1-1\/2 inches (1.5 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReach Length\u003c\/strong\u003e: 3\/16 inch (0.187 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Helix\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfiguration\u003c\/strong\u003e: Single End\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.02 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 27112803\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HARVEY TOOL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 802431\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HARVEY TOOL","offers":[{"title":"Default Title","offer_id":51751425048882,"sku":"802431","price":74.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/5604eb7cd5fb6161fa95c984900a7a44_58db1b16-5097-48b1-a714-4f6c1507a668.jpg?v=1788923401","url":"https:\/\/voomisupply.com\/products\/harvey-tool-802431-square-end-mill-1-32-in-4-flute-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}