{"product_id":"harvey-tool-775924-square-end-mill-3-8in-2-flute-carbide","title":"Harvey Tool 775924 Square End Mill 3\/8in 2 Flute Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe HARVEY TOOL 775924 is a solid carbide square end mill designed for precision milling operations in metal cutting and machining applications. With a 3\/8-inch cutting diameter and 1-1\/8-inch length of cut, it delivers clean, square-shouldered slots, pockets, and profiles. The two-flute configuration and 40-degree helix angle support efficient chip evacuation, while the bright\/uncoated finish suits a range of workpiece materials. At 3 inches overall length with a 3\/8-inch shank, this end mill mounts directly into standard collet chucks and end mill holders. Machinists and CNC operators select this tool for both production runs and prototype work.\u003c\/p\u003e\u003cp\u003eThis end mill is suited for use in vertical machining centers, CNC routers, and manual knee mills where square-shoulder profiling, slotting, and peripheral milling are required. The downcut flute geometry directs cutting forces downward, which helps reduce workpiece lifting and produces a cleaner top-edge finish on laminates and composites. It is a single-end tool, meaning the cutting geometry is on one end only. Right-hand cutting direction requires standard spindle rotation.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e3\/8-inch cutting diameter with 1-1\/8-inch length of cut for precise slot and pocket milling\u003c\/li\u003e\n\u003cli\u003eSolid carbide construction for rigidity and wear resistance compared to HSS tooling\u003c\/li\u003e\n\u003cli\u003eDowncut flute geometry reduces workpiece lifting and improves top-surface finish quality\u003c\/li\u003e\n\u003cli\u003e40-degree helix angle promotes smooth cutting action and efficient chip evacuation\u003c\/li\u003e\n\u003cli\u003eBright\/uncoated finish compatible with a broad range of materials and cutting fluids\u003c\/li\u003e\n\u003cli\u003eRight-hand cut, right-hand flute, single-end configuration for standard CNC and manual mill setups\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a direct-fit replacement or standard tooling selection for any machine spindle accepting a 3\/8-inch shank end mill via collet, end mill holder, or shrink-fit toolholder.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation is performed by qualified machinists or CNC setup technicians. Power down and lock out the machine spindle before inserting or removing the tool from the holder. Ensure the shank is fully seated to the recommended engagement depth in the collet or holder before tightening. Do not use this tool for plunge cutting, as this is a non-centercutting end mill.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Diameter\u003c\/strong\u003e: 0.375 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 1.125 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.375 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 40 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Downcut\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Type\u003c\/strong\u003e: Single End\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions\u003c\/strong\u003e: 3.31 x 0.51 x 0.51 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.15 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HARVEY TOOL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 775924\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HARVEY TOOL","offers":[{"title":"Default Title","offer_id":51735473783090,"sku":"775924","price":182.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/4ecc6664c521d3da3af2ec783a423f91.jpg?v=1788772620","url":"https:\/\/voomisupply.com\/products\/harvey-tool-775924-square-end-mill-3-8in-2-flute-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}