{"product_id":"harvey-tool-76475-c3-square-end-mill-1-9mm-4-flute-carbide","title":"Harvey Tool 76475-C3 Square End Mill 1.9mm 4 Flute Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe HARVEY TOOL 76475-C3 is a solid carbide square end mill designed for precision milling in ferrous and hard materials. With a 1.9 mm (0.0750 inch) cutting diameter and a 0.225-inch length of cut, this four-flute tool delivers clean, accurate results in tight-tolerance applications. The AlTiN coating extends tool life in high-heat cutting environments by improving hardness and oxidation resistance. The extended reach design, with a 0.5-inch reach length, allows access to features that standard-length end mills cannot reach. Machinists and tool-and-die professionals working in CNC milling operations will find this tool suited for slot milling, profiling, and detail work at small diameters.\u003c\/p\u003e\n\u003cp\u003eThis end mill is intended for use in CNC machining centers and manual mills where small-diameter, high-precision cutting is required. The 30-degree helix angle promotes smooth chip evacuation and reduces cutting forces in both roughing and finishing passes. The right-hand cutting and right-hand flute direction make it compatible with standard spindle configurations. It is well suited for mold and die work, medical component machining, and precision part production where a 1\/8-inch shank is the required toolholder interface.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e1.9 mm (0.0750 inch) cutting diameter for fine-detail and small-feature milling\u003c\/li\u003e\n  \u003cli\u003eAlTiN coating provides elevated hardness and heat resistance for extended tool life in ferrous materials\u003c\/li\u003e\n  \u003cli\u003eFour-flute geometry balances material removal rate with surface finish quality\u003c\/li\u003e\n  \u003cli\u003eExtended reach with 0.5-inch reach length for access to recessed features\u003c\/li\u003e\n  \u003cli\u003e30-degree helix angle promotes efficient chip evacuation and reduced cutting forces\u003c\/li\u003e\n  \u003cli\u003eCentercutting capability allows plunge entry into workpiece material\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with 1\/8-inch diameter collets and toolholders in CNC machining centers and manual milling machines configured for right-hand cutting tools.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified machinist or CNC setup technician. Ensure the machine spindle is fully stopped and the tool changer or collet is de-energized before inserting or removing the end mill. Secure the shank to the full recommended engagement depth in the collet or toolholder to prevent pullout under cutting loads. At small diameters, verify runout with a dial indicator before beginning a production run, as even minor misalignment accelerates tool wear.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 1.9 mm (0.0750 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.225 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.125 inches (1\/8 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReach Length\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: AlTiN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVariable Helix\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Type\u003c\/strong\u003e: Single End\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.01 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HARVEY TOOL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 76475-C3\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HARVEY TOOL","offers":[{"title":"Default Title","offer_id":51731881001266,"sku":"76475-C3","price":79.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/686a8d45420083fb359edd0ae3931bce_edd43de9-68f7-40a7-b0ee-314ac2ae8c09.jpg?v=1788736007","url":"https:\/\/voomisupply.com\/products\/harvey-tool-76475-c3-square-end-mill-1-9mm-4-flute-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}